A109-M easyONE-Manual

This product range is no longer produced.

All downloads, such as the manual can be found here under “Downloads”.

We continue to offer the service for easyONE devices.

EAN

4260276740093

standup surfen wasserski kanu kitejetski angeln

This product is replaced by A10902 easyONE-M-DSC-CL >

The new easyONE-M is a palm sized AIS MOB (Man over Board) emergency transmitter with pure manual activation. Due to its small size the unit can be used within all kinds of watersport fun activities where automitical life jackets and unit activation when submerged don’t make any sense. Nevertheless, having an emergency transmitter is very useful.

Function

The broadcast of the emergency telegram is based on a worldwide standardized VHF transmission system, which is mandatory by law for commercial shipping since 2007: AIS (Automatic Identification System). On these frequencies, vessels communicate with each other to avoid collision. Within these transferred data, there is information like current GPS position and course and speed over ground. More and more pleasure boaters also use such an AIS System just to be informed about the surrounding commercial vessels for safety reasons. The easyONE-M is fixed to the body with a safety-cord which ensures that the unit will keep floating in front of the victim. A strong and bright LED guides the victim for better visibility in darkness. In case of emergency the unit is activated by pressing a button. This will trigger an emergency broadcast transmission. A full AIS MOB message is sent. This message contains the individual unit ID, the current GPS position of the unit, as well as curse and speed over ground. The unit ID allows the AIS receiver aboard to display the official symbol (red X with red circle) on chart plotter and computer displays (within a range up to 7 nm and more). The victim’s position is updated every minute and transmitted 7 times within 60 seconds. This will lead to a maximum of potential emergency.  

 

  • AIS MOB emergency transmitter
  • full AIS MOB transmission (972…)
  • each AIS system within range will be informed about victims current GPS position, COG and SOG
  • easy pull-off protection cap
  • pure automatic activation by
  • one-button-touch
  • more than 1 Watt radiated power
  • transmission range up to 7 nautical miles and more
  • more than 36 hours battery capacity after activation
  • strong and bright Flash LED for better visibility in darkness
  • small and handy size
  • 100% floatable
  • no registration required
  • no VHF license needed
  • Dimensions: 168 * 48 * 27 mm
  • Weight: 120 Gram
  • Battery: 6V, 2 Lithium cells, CR17345
  • Battery capacity:
  • 24 h at -20°C
  • 36 h at 0°C
  • Battery lifespan: 7 Years
  • Frequency: 161,975 und 162,025 MHz
  • Radiated power: 1 Watt
  • GPS receiver: with integrated antenna according IEC 61108-1
  • VHF antenna foldout, coiled in device per default
  • Display: 2 LEDs
  • („GPS Status“ and „FLASH“)
  • Controls: 2 buttons
  • („TEST“ and „ON“)
  • Supported AIS messages in transmission mode Msg. 01
    • AIS position report
    • Device identification number
    • Course over Ground COG
    • Speed or Ground SOG
    • Msg.14
    • Safety message
    • Device identification number
    • Text: „MOB active“ in case of emergency („ON“)
    • Text: “MOB TEST” in test mode („TEST“)
  • Operating temperature: -20°C to +55°C
  • Storrage temperatur: -40°C bis +70°C
For best performance in the AIS MOB class:

with more than 36 hours of battery capacity after activation, significantly longer duration radiated with more than 1 watt of power;  greater transmission range, 100% float (without buoyancy aid)

A179 easyTRX – SOLAS AIS Class A

AIS Class A | Inland Transponder in cooperation with CNS Systems™
  • Increased situational awareness for inland navigation, the system communicates the blue sign for inland waters.
  • The AIS transponder can be configured to operate either as an AIS Inland or a Class A transponder.
  • The system communicates required static, voyage related and dynamic data.
The easyTRX – SOLAS AIS Class A/Inland transponder provides SOLAS compliance and BSH certification at very attractive prices. The easyTRX – SOLAS AIS Inland transponder is based on the well proven AIS Class A transponder of CNS Systems and developed in accordance with the latest AIS Inland standard requirements.
The AIS Inland transponder is type approved by Fachstelle der WSV für Verkehrstechniken FVT.
The data link communication covers standard AIS messages and the required static, voyage-related and dynamic data as well as blue sign messages for inland navigation for increased situational awareness and improved safety for the individual ship.
The SOTDMA technology used in the AIS transponder transmits and receives information on all vessels within VHF coverage. This information includes position, identity, course over ground, heading, and rate of turn as well as navigational status and the destination of the ship.
The AIS Inland transponder broadcasts Inland blue sign status messages for upstream or downstream navigation; ships passing on starboard side, hazardous cargo carriage (Blue Cones), and estimated time of arrival at locks, bridges and terminals. Lock management, information on draught, type of cargo and destination is vital for decision making and safe maneuvering along the inland waterways.
The information received from, and provided to, the ships is easily plotted on any ARPA radar or electronic chart system. Maximum situational awareness is accomplished.
Configuration and interfaces
The AIS Class A/Inland transponder is easy to install onboard any ship by connecting it to a GPS and VHF antenna, and is complete after connecting it to the onboard sensors. To maximize the benefi t of the investment, the AIS Inland transponder is delivered with an interface to the Inland ECDIS and/or ARPA radar.
The AIS Class A/Inland transponder consists of an integrated Minimum Keyboard and Display (MKD).
Power
Input voltage 11-36 V DC
Radio
Transmitter output power (adjustable) 1 and 12.5 W, 50 Ohm load
Bandwidth 25 kHz
Protocol TDMA (AIS)
Baud rate 9600 bps (AIS) / 1200 bps (DSC)
Modulation GMSK (AIS) / FSK (DSC)
Frequencies 156.025 MHz – 162.025 MHz
Default channels 87B (161.975 MHz), 88B (162.025 MHz), 70 (156.525 MHz)
Number of receivers 3 (2 AIS TDMA, 1 DSC)
Receiver sensitivity, 20% MER < – 107 dBm

 

GNSS Receiver
GNSS receiver GPS L1, 50 parallel channels
DGNSS support Yes

 

Environmental
IEC 60945 Protected installation
Interfaces
VHF antenna N female, 50 Ohm
GPS antenna TNC female, 50 Ohm
Power 3-way plugable screw terminal
Sensor Interfaces 1 to 3 (RS422) IEC 61162-1 or -2
Pilot/Auxiliary (RS422) IEC 61162-2
External Display (RS422) IEC 61162-2
Long-Range (RS422) IEC 61162-2
Blue sign interface Discrete Input 24 V DC / Open
DGNSS correction input (RS232) RTCM/SC-104
Alarm relay Normally closed

Standards
ITU-R M.1371-4
IEC 61993-2
IEC 61162-1, 2
IMO Resolution A.694 (17)
IMO Resolution MSC.74 (69) Annex 3,
TU-R M.825-3
ITU-R M.1084-3,
EC 61108-1,
EC 62288
IPC-A-610 (manufacturing)
RTCA/DO-178B (SW development)
CCNR Vessel Tracking and Tracing Standard for Inland Navigation version 1.01

Physical characteristics
GNSS receiver GPS L1, 50 parallel channels
DGNSS support Yes

Integrated MKD on the front panel
Plugable screw terminals for cable connections

Accessories included

Compliance
BSH Statement of Conformity
FVT type approved

 

easyPOSALERT, easyPOS’N’HOOK, vmsTRACK – Software

  • Programming-Tool, Version 3.74
  • Product: easyPOSALERT, easyPOS’N’HOOK and vmsTRACK-/PRO
  • Stand: 30.10.2023
  • Size: 33.787KB
  • Type: ZIP
  • New:
    • Admin-Light, further settings
  • Programming-Tool, Version 3.73
  • Product: easyPOSALERT, easyPOS’N’HOOK and vmsTRACK-/PRO
  • Stand: 18.04.2023
  • Size: 32.435KB
  • Type: ZIP
  • New:
    • Liberia Map
  • Programming-Tool, Version 3.72
  • Product: easyPOSALERT, easyPOS’N’HOOK and vmsTRACK-/PRO
  • Stand: 08.12.2020
  • Size: 32.290KB
  • Type: ZIP
  • New:
    • Qatar map differed to others
  • Programming-Tool, Version 3.71
  • Product: easyPOSALERT and vmsTRACK-/PRO
  • Stand: 21.04.2020
  • Size: 112.843KB
  • Type: ZIP
  • New:
    • Save Settings by User-INI File
    • Bug-Fix: Bracket- Usage
  • Programming-Tool, Version 3.68
  • Product: easyPOSALERT and vmsTRACK
  • Stand: 05.11.2019
  • Size: 32.260KB
  • Type: ZIP
  • New: added Qatar Map
  • Programming-Tool, Version 3.67
  • Product: easyPOSALERT and vmsTRACK
  • Stand: 15.10.2019
  • Size: 32.884KB
  • Type: ZIP
  • New: adding diff. countries for charts, bugfix on SAT-Extender
  • Programming-Tool, Version 3.64
  • Product: easyPOSALERT and vmsTRACK
  • Stand: 19.03.2019
  • Size: 41.944KB
  • Type: ZIP
  • New: internal Bugfix, Timing,
  • Programming-Tool, Version 3.62
  • Product: easyPOSALERT and vmsTRACK
  • Stand: 08.09.2017
  • Size: 28,7MB
  • Type: ZIP
  • New: Color difference in Track by ALERT / ON mode in GoogleEarth
  • Programming-Tool, Version 3.60
  • Product: easyPOSALERT and vmsTRACK
  • Stand: 08.09.2017
  • Size: 28,7MB
  • Type: ZIP
  • Programming-Tool, Version 3.59
  • Product: easyPOSALERT and vmsTRACK
  • Stand: 17.08.2017
  • Size: 28,8MB
  • Type: ZIP
  • Programming-Tool, Version 3.41
  • Product: easyPOSALERT and vmsTRACK
  • Stand: 30.05.2016
  • Size: 21,5 MB
  • Type: Zip

Accessibility Menu

WordPress Cookie Plugin by Real Cookie Banner