Office closed for X-mas

Dear Customer,

In the week after the Christmas-Days our office will be closed  until Tuesday, 2nd of January 2018. Than we are back on work for you as you are familiar with us.

We wish you and your family a blessed and holy Christmas time and a HAPPY NEW YEAR 2018.

Your Weatherdock-Team

A21100 raspAIS

 

raspAIS (A21100)
Mobile AIS Receiver

Mobile 2-channel AIS receiver based on a Raspberry Pi®

Multimedia center for videos and audio content with 4 USB slots

Deutsch de_DE |
A21100 raspAIS front
Logo raspAIS blau
Logo raspAIS blau
Logo raspAIS blau
  • AIS to go
  • Multimedia center & Receiver
  • 4 USB slots

Product photos

Product information

l

Function

The new raspAIS from Weatherdock is equipped with a latest generation 2-channel-receiver for parallel and persistant reception of the two AIS frequencies.

The unit picks up all kind of AIS signals:
AIS Class A, AIS Class B, AIS SART, AIS MOB as well as AtoN signals will be received out of the vicinity.

A low power consumption management ensures that as less power as possible will be used running the system.

The collected data will be interpreted and forwarded to a connected mobile device for displaying on an electronic chart.

As the central basic component a Raspberry Pi® Modell 3B is doing a perfect job in the background. Due to the wide range of possible connectivity, received AIS data can be forwarded via WiFi or LAN connection.

Z

Highlights

  • Real parallel AIS reception mode on both AIS
    frequencies (161,025 MHz + 162,025 MHz)
  • High channel sensivity
  • Multi-Port data output
  • HDMI port
  • AUX output for speaker
  • LAN and WiFi connectivity
  • Pre-installed AIS capable software
  • Less power consumption
l

How to run

With the received AIS data there are several ways to work with the raspAIS for display and navigation:

  • via WiFi connection to a smartphone or table
    The used mobile device has to be connected to the WiFi network of the raspAIS. Within the AIS capable app on the mobile device IP and port of the raspAIS has to figured in.
  • via HDMI conection to a PC or TV screen
    The integrated AIS software running in the background is managing all neccessary steps to display the position reports of all abjects around you. PC or TV screen is used as huge display.
  • via WiFi connection to a smartphone or table without AIS app
    With a free of charge software running on the used mobile device you will be able to mirroring the raspAIS display. Just connect the mobile device to the WiFi network of the raspAIS.

But the new raspAIS is even more than an AIS receiver. It can also be used as a multimedia center for videos and audio content. 4 USB slots keep enough space for USB storage additional connected to mouse and keyboard.

Technical Data

  • 2-Channel VHF receiver for both AIS frequencies
  • Connection port for mobile AIS antenna
  • Connection ports for USB, LAN, HDMI & 3,5mm audio-out
  • WiFi and LAN connectivity
  • Pre-installed AIS software „openPlotter“
  • based on Raspberry PI® Modell 3B
  • palm-sized housing: 85 x 56 x 45mm
  • only 150g weight
  • external GPS source required

Downloads

A181 easyRX2 S-LAN

AIS Receiver    |       Product overview     |    FAQ

 A181 easyRX2 S-LAN

l

Function

Like any AIS receiver, the easyRX-LAN receives the telegrams of the Class A and Class B transceivers. A novelty of the easyRX-LAN is the LAN module, which enables a direct connection to an existing computer network. Likewise, the recording of the NMEA data into the WWW can be realized without any detours.

What is necessary to connect an easyRX LAN?

 

First, there must be a working computer network. In addition to a 12 volt DC power supply you need a standard LAN cable RJ45 and an VHF antenna.

 

Which PC software is the easyRX-LAN suitable for?

 

Any PC software that can process and display AIS data is suitable to be used with the easyRX LAN.

 

To configure the easRX-LAN, a PC is required. (at least WIN XP or higher)

 

Z

Highlights

  • LAN output and serial interface type NMEA 0183
  • 12 volt plug included
  • Forwarding of NMEA data possible
    • in local network
    • in www
  • Installation easyRX LAN via IP address (DHCP or fixed IP)
  • Possible applications
    • port authorities
    • Commercial shipping
    • Info stations along the shoreline

Technical Data

Receiver

  • 2 channel AIS receiver for AIS data on 161.975 MHz and 162.025 MHz frequencies
  • Channel spacing: 25 kHz
  • Sensitivity: -113 dBm
  • Datarate:   9600 Bps
  • Antenna impedance:   50 Ohm
  • Electrical connection data
    • Antenna input:   PL
    • LAN connection:   RJ45

Output:

  • Data transfer rate:   38,4 kB
  • Format:   NMEA 0183
  • NMEA telegram type: VDM

Dimensions

 

 

  • Baudrate: changable 38400 or 4800, bidirectional
  • NMEA Telegramtype : VDM
  • Connector VFH antenna: 50 Ohm, SO2239
  • Connector GPS antenna: 50 Ohm, BNC
  • Cabin mounting, IP60, -25°C – 55°C
  • 198mm (L) 158mm (W) 47mm (H)
  • Weight: 275 g.

EAN

4260276741816

DOWNLOADS

A04003 easyRESCUE-PRO 3

p

Produktinformation

  • Fully automatic release
  • AIS + DSC & HOMING emergency messages and location signal
  • Range up to 15 nm (depending on the height of the receiving antenna)
  • Buoyant without a buoyancy aid
  • Up to 8 different MMSI numbers programmable via Bluetooth and app for DSC “closed loop”

EAN

4260276740420

Z

Approval

Our easyRESCUE Rescue Transmitters have a basic approval and do not have to be registered anymore!

easyRESCUE-PRO App

With the easyRESCUE-PRO App, up to 8 different MMSI numbers can be pre-programmed in the rescue transmitter via Bluetooth.
Download here >

Produktbilder

A10901 easyONE-DSC-CL

Z

Customer Information

Some easyONE-DSC devices with service interval Feb/2026 to May/2026 may have a faulty “test” function. However, the functionality in the “Alert” mode is guaranteed.
In the context of preventive user safety, we ask you to return equipment with the above service interval to the company Weatherdock for inspection if necessary.

This product range is no longer produced.

All downloads, such as the manual can be found here under “Downloads”.

We continue to offer the service for easyONE-DSC-CL devices.

p

Product information

  • Fully automatic triggering
  • AIS + DSC emergency messages
  • Compatible with all automatic lifejackets
  • Floatable without buoyancy aid
  • 24+ hours of battery life after activation

EAN

4260276740352

Z

Approval

Our easyONE-DSC Rescue Transmitters have a basic approval and do not have to be registered anymore!

easyRESCUE-PRO App

With the easyRESCUE-PRO App, up to 8 different MMSI numbers can be pre-programmed in the rescue transmitter via Bluetooth.
Download here >

Product Pictures

Accessibility Menu

WordPress Cookie Plugin by Real Cookie Banner