Software Update for vmsTRACK/-PRO + easyPOSALERT (v 3.67)

For the vmsTRACK/-PRO (A138/A193) and the easyPOSALERT (A118) a software update is available. The most important changes of version 3.67 at a glance:

  • Maps for different countries have been added:
    • Bangladesh, Myanmar
    • Cambodia
    • Pakistan
    • Guyana, Suriname, French Guyana
    • Sri Lanka
  • Bug fix: SAT extender
 

vmsTRACK Update: Software (version 3.67)

Software Update for easyTRX3 (v 1.6)

A software update of the easyTRX3 Programming-Tool is available. The most important changes of version 1.6 at a glance:

  • Bugfix: CPA / Anchor hardware switches are now detected correctly
  • Bugfix: Bugfix at program start
  • MacOS 64-bit version available

 

Quick Start Software Update:

Save the software locally on your PC / Mac and start the installation by double-clicking on the setup file.

 

Click here for the current firmware (version 1.0.19) >

easyTRX3 Update: Programming-Tool (version 1.6)

GPS-Week-Rollover easyTRX2 and easyTRX2S family

All information about the GPS-Week-Rollover


 

What does “GPS Week Rollover” mean?

In addition to accurate position information, the GPS satellites also provide date and time information. However, the counter for the GPS system, developed in 1980, can count a maximum of 1024 weeks (about 19.7 years). Then the counter jumps to zero and the GPS time counts again from the beginning. This process is called “rollover”. For the first time there was the GPS Week rollover in August 1999, the second in April 2019.

 

What are the implications of GPS Week Rollover?

For the affected devices, the date and time information since the rollover is incorrect. The position information is not affected and still very accurate.

 

Which devices are affected by the GPS Week rollover

From Weatherdock some easyTRX2 and easyTRX2S transceivers are concerned, for which we prepared a firmware update, which fixes the problem.

Firmware-Update

Firmware-Update

Software Update for easyTRX3 (v 1.3)

A software update of the easyTRX3 Programming-Tool is available. The most important changes of version 1.3 at a glance:

  • WiFi settings improved
  • Bug fixes

 

Quick Start Software Update:

Save the software locally on your PC / Mac and start the installation by double-clicking on the setup file.

 

IMPORTANT: Please also update the firmware to the actual version.

Click here for the current firmware (version 1.0.19) >

easyTRX3 Update: Programming-Tool (version 1.3)

Firmware Update for easyTRX3

A firmware update for the easyTRX3 is available. All changes at a glance:

  • Stability improvements
  • GPS position improved over NMEA2000
  • GPS time optimized via NMEA2000

 

Quick Instruction Firmware-Update:

Save the Firmware locally on your PC/Mac.
Open the Programming-Tool for configuring the easyTRX3.

Click on the “Info/Update” button on the bottom left and select the location where you saved the downloaded firmware files. Follow the instructions of the Programming-Tool to install the new firmware on the easyTRX3.

easyTRX3 Update

Firmware Update of easyTRX2 / easyTRX2-S devices

From time to time we update our devices regarding the firmware. Within that update we implement new functions or remove code issues. How to update the firmware, will be explained below.

Needed components

  1. Your easyTRX2 / easyTRX2-S
  1. Firmware of your device:

Download the right ZIP file for your device and unpack it to get the contained *.wdc file. This is the actual firmware you need.


 

  1. The latest Programming-Tool which you can download here:
    https://www.easyais.com/download-2/software/easytrx2s-software

That means also: Open the ZIP document and start the contained EXE file.

Updating the Firmware

  1. Open the Programming-Tool which you downloaded before. If applicable you´ll find a shortcut on your desktop.

 

  1. Select the right COM port of your device, mostly it’s the highest number. In our example its COM9
    Press „Connect“.
    Wait until the bar is fully green.
  1. Now press File>Update
  2. Select “Open update file” and search for your firmware (*.wdc) which you downloaded before.

  3. Start the update by pressing “Start Update”
  4. Wait again until the bar is fille fully green and you see the popup window “Update successfully finished”.

 

  1. Done, your device is updated successfully
Select Language
Back to top