A159 Mini GPS-Antenna

Small magnetic active patch GPS antenna with waterproof housing for mounting on dashboard, windshield or metallic surfaces.

Contents: Cleaning cloth, BNC-FME adapter, metal adhesive pad, mini GPS antenna

  • Size: 40 x 50 x 12.5 mm
  • Cable length: 2.5m
  • Plug: FME

B126 easyONE holder

EAN

4260276740239

With that holder the easyONE emergency transmitter is always ready at hand.

Whether on the deck or directly in the companionway, with the flexible holder the easyONE is safely stowed on board and quickly in hand in case of an emergency. The holder is weather-resistant and can be screwed or glued depending on the substrate.

  • Color: red
  • Dimensions: 8 x 8 x 3,5 cm

  • Material: shockproof plastic with gripping part made of rubbery, flexible plastic

A087 easyWATCHBOX

Documents

easyWATCHBOX – external signal source for different dangerous situations.

With the easyWATCHBOX you are informed about the most important dangerous exposures in pleasure boating within only one box:

  • CPA alert for collusion potentials
  • AIS S.A.R.T. alert for incoming emergency signals
  • Battery low

To be single handed aboard don‘t gives you the time to watch out the chartplotter for danger potentials every minute. In these situations it is very useful to be informed automatically.

Function

The easyWATCHBOX will be integrated into the data stream between the AIS device and the chartplotter or PC/Laptop. Now the incoming AIS data are analyzed for special parameters. If one of these figures is triggered, for example AIS S.A.R.T. emergency signal, the unit starts alerting by visual and acoustic signals.

By means of two buttons it is possible to adjust the time and distance figures for the CPA alert.

The triggered alert could be muted by button. But only this special case. If another dangerous situation comes up, the alert will go on again.

This CPA alert function can be disarmed by pressing two buttons at the same time.

Another alerting function is battery low. By means of being plugged to the boats power supply, the voltage is checked
continously by the easyWATCHBOX.

If a certain voltage level is undershot, the unit starts alerting.

What is nessesary to run the easyWATCHBOX?

To use the easyWATCHBOX an AIS Receiver or Transceiver is the only request.

  • Monitoring of the AIS data stream via NMEA0183 input
  • Alerting device for AIS S.A.R.T. active (message 1 and 14)
  • Alerting device for CPA figures
  • Alerting device for battery low
  • Acoustic (95dB) and visual alert (LED)
  • Power supply 9-32VDC, 6mA
  • Internal signal source with 95dB
  • LED signal for AIS S.A.R.T.
  • CPA Alert (closest point of approach)
  • Battery Low

A056 easyCPA³

Documents

Notified immediately  if necessary!

The CPA³-alarm is an additional accessory to bundle different functions and actions at a central point.

Functionality
The CPA³-alarm combines an acoustic signal generator for a triggered CPA-function and an incoming AIS S.A.R.T. emergency notification with a switch to change to the “silent mode” and an uncovered “PAN PAN”-switch.

This device receives impulses from the easyTRX2 and TRX2-IS, respectively once the set CPA-function has been triggered and turns them into acoustic signals. This also applies to the incoming AIS S.A.R.T emergency notifications. These two acoustic signals differ from one another in order to be able to allocate them more easily.

The “silent mode” switch turns off the transmit function of the connected easyTRX2 or easyTRX2-IS, with the result that no data about the vessel and its position is sent. This notification contains the message that you are having a problem and that you are asking for help. An AIS telegram type 14 is sent.

What is necessary to operate an easyCPA³-alarm?
It is required to have an easyTRX2 or an easyTRX2-IS in operation. Only with these two devices it is possible to set the incoming AIS signals in relation to the settings of the CPA-function and to initiate respective actions.

Dimensions

  • Bottom plate: length 81 mm, width 31 mm
  • Box: height 27 mm
  • acoustic pressure of the signal generator: 105 decibel
  • frequency: 2.9 kHz continuous tone
  • operating temperature range: -20°C – +60°C
  • operating voltage is analogous to the connected easyTRX2 or easy TRX2-IS
  • protective cap for the “PAN PAN” switch prevents an accidental triggering

A052 easyCPA

Information
The CPA-alarm is an external signal generator for the CPA (Closest Point of Approach)-function and for the acoustic notification of an incoming AIS S.A.R.T emergency telegram.

Functionality:
The easyCPA-alarm is designed as additional equipment to the AIS transmit-receivers easyTRX2 and easyTRX2-IS and it improves the safety on board.
With this external acoustic signal generator it is ensured that previously defined potential dangers are recognized through the CPA-function of the receiver and hence are signaled clearly.
AIS emergency telegrams that were sent by activated AIS S.A.R.T are recognised and signalized. Thus a temporarily delayed perception through sleep or turned off terminal devices is prevented.

The device receives impulses by the easyTRX2 and by the easyTRX2-IS, respectively as soon as the set CPA-function was triggered and turns them into acoustic signals. The easyCPA-alarm has two different acoustic signals, to be able to differentiate between CPA-warnings and AIS S.A.R.T.

What is necessary to operate an easyCPA-alarm?
You need an easyTRX2 or an easyTRX2-IS in operation. Only with these two devices is it possible to set the incoming AIS signals in relation to the settings of the CPA-function and to initiate respective actions

  • Dimensions
  • Bottom plate: length 81 mm, width 31 mm
  • Box: height 27 mm
  • acoustic pressure of the signal generator: 105 decibel
  • frequency: 2.9 kHz continuous tone
  • operating temperature range: -20°C – +60°C
  • operating voltage is analog to the connected easyTRX2 or easy TRX2-IS

A122 Tamperproof & Powersocket

EAN

4260276741229

The A122 Tamperproof & Powersocket is a tamper-proof charging station for the vmsTRACK-PRO. The charging station can be easily connected to the electrical system or another external power source. The cable ends only need to be connected accordingly. Mains voltages of 9 to 32 volts are possible.

  • Input: 9 – 32 V DC
  • Operating Temperature: 0°C – 50°C
  • Stowage: -20°C – 70°C

A121 Power Supply Socket

EAN

4260276741212

The A121 Power Supply Socket can be easily connected to the electrical system or another external power source. The cable ends only need to be connected accordingly. Mains voltages of 9 to 24 volts are possible. If you want to work with the national power grid, we recommend the A180. Here is a Euro plug for the 230 volt application already preassembled. All you need is an adapter plug for your country or socket type.

A045 easyN2Konnect

The easyN2K converter enables to connect AIS devices with NMEA0183 into the latest NMEA2000 network standard.
Connecting networks – actual and new ones in harmony.

Function

Latest linked up data- and display-systems aboard yachts are running by means of a so-called NMEA2000 network. Data interchange between NMEA0183 and NMEA2000 is not possible without a converter. This is where the easyN2K comes into picture. The easyN2K is connected just between the AIS device running with NMEA0183 and the chartplotter or PC / Labtop running on NMEA2000. The unit “translates” the NMEA0183 data stream.

Requirements for the easyN2K?

Every AIS transponder or AIS receiver who sends out data via NMEA0183 standard can be connected to the easyN2K. The outgoing data can be interpreted and precessed by any suitable NMEA2000 device.
easyN2K and gadgets that fit together?

All you need is a NMEA2000 network and corresponding devices to display NMEA2000 data. The N2K is connected directly to the NMEA2000 network via the standardized NMEA2000 plug. The NMEA0183 device will be connected with the easyN2K via an ac-cording cable. No other wiring, concerning power supply, is required.

  • Provides connectivity of NMEA0183 AIS devices with a NMEA2000 network
  • Straightforward handling thanks to plug and play characteristics
  • NMEA0183 devices are power supplied by the easyN2K
  • Used plug types
  • NMEA0183: 6 pin microphone plug
  • NMEA2000: micro style plug
    o        NMEA0183 input:
  • Baud rate: 38400 Baud
    o        NMEA2000 compatible output:
  • power supply via NMEA2000 (9-26VDC)
  • Current consumption <30mA at 12V
  • Baud rate: 250 kBd

A135 easyINFOBOX mobile

A135 easyINFOBOX mobile

E

easyINFOBOX mobile

p

Product information

Independent AIS System for mobile applications

The easyINFOBOX by Weatherdock AG is a shock-proof PP/ABS box with an integrated AIS receiver. It‘s the robust, dust- and water-resistant housing for a AIS unit, receiving AIS signals from the ambient vessels which can be displayed by a mobile device. The easyINFOBOX is designed for the mobile usage of AIS data. By means of the DC plug power supply of every board net can be used. The box has exterior plugs for GPS and VHF antennas. The internal AIS unit has got a WiFi module, transmitting the data to a connected mobile device like an iPad, Tablet or Laptop. With an AIS capable software or app the received AIS data with the relevant information can be shown on the screen.

Function The AIS unit inside the easyINFOBOX  receives AIS data within a range of up to 25 miles via the connected VHF antenna. The received data are translated into  NMEA0183 protocols and transmitted to the used mobile devices like iPad, Tablet PC or Laptop. These units are getting the NMEA0183 protocols by means of WiFi TCP/IP connection in a peer-to-peer network. Required is an AIS capable software or app running on the mobile device, as well as the correspondent maps. By connecting the external GPS antenna, the AIS unit receives it‘s own GPS position.

Applications

  • Helicopter Rescue-Units of
  • oil platforms or offshore wind parks
  • Diving groups
  • Long-Term regattas with air support
  • Charter units
Z

Highlights

  • Water-resitant, shock-proof
  • easy to carry by means of two handles
  • internal AIS receiver with WiFi module
  • exterior plugs for power supply, GPS antenna and VHF antenna
  • exterior WiFi antenna

Technical Data

  • Dimensions:
  • (L) 29 cm x (W) 23 cm x (H) 9,5 cm
  • Weight: 1,5 Kg
  • Operating temperature range:
  • -20°C to 55°C
  • AIS receiver with 161,975 MHz and 162,025 MHz
  • WiFi
  • peer-to-peer-connection
  • maximum range in free air: 100m
  • usual range: approx. 30m
  • with our new WiFi function it is possible to have up to 40 clients (terminals).

Product pictures

A029 GPS Antenna

Functionality:
The GPS antenna of the company Weatherdock AG is GPS antenna suppling “raw data”, not NMEA data. The antenna is connected in an easy way to the easyTRX (or any other AIS Class B transceiver) If you use the GPS antenna, you nevertheless must have a separate VHF antenna for the easyTRX.

What is necessary to connect the GPS antenna?
There is no special device or adapter necessary. The antenna is supplied with a 5m long cable and the right plug to connect it to the easyTRX. The cable itself can be extended by a cable extension up to 15m. But, please if you extend the cable, please use a good cable, eg. Aircell 7 or similar and not the regular RG58.

For which Class B AIS the antenna can be used?
The GPS antenna can be used for every Class B AIS transceiver which needs GPS raw data. (Most of all Class B AIS do need raw data GPS antennas!) Reseon for that please find under FAQ.

  •  Frequency: 1575,42MHz
  • Amplification tipically 27dB
  • Noise; 2dB max
  • Voltage: 5VDC +/-10%
  • Power consumtion: <30mA
  • VSWR: 2.1 max
  • Plug: BNC male
  • GPS antenna
  • GPS antenna supplies raw data, no NMEA data
  • Power supply through the cable by means of the easyTRX2
  • Incl. onboard mounting socket in ABS
  • Article number A029

B066 easyRESCUE neopren bag

EAN

4260276740376

The neoprene pocket can be felted on the upper arm by means of a belt. The belt is adjustable in length and can be adapted individually to the person.

Both the AIS SART emergency transmitters of the easyRESCUE family as well as the portable VHF position transmitters of the vmsTRACK series can be used with this bag.

The functional “TEST” and “ON” buttons are free and can therefore be operated even when the unit is in the pocket. The four status LEDs can also be viewed freely.

  • To be used with
    • AIS SART easyRESCUE
    • VHF UKW Locators vmsTRACK
  • Length of the belt can be individually adjusted
  • Wearing comfort
  • No movement restriction

A053 easyINFOBOX

A053 easyINFOBOX

E

easyINFOBOX

p

Product information

The easyINFOBOX-Diving developed by Weatherdock is a shock-proof PP/ABS box with an integrated AIS receiver for diving groups. Is‘s the robust, dust- and water-resistant housing for a AIS unit, receiving the signals from the activated easyDIVEPOS units of the group members which can be displayed by a integrated Chart Plotter. The easyINFOBOX is designed for the mobile usage of AIS data. By means of the DC plug power supply of every board net can be used. The box has exterior plugs for GPS and VHF antennas.

Function The AIS unit inside the easyINFOBOX Divi9ng receives via the connected VHF antenna transmitted signals within a distance of up to 12 nautical miles. The range depends on the receiving height of the VHF antenna. The received data are translated into a NMEA0183 protocols and is transmitted to the Chart Plotter. By connecting the external GPS antenna, the AIS unit receives it‘s own GPS position

Applications

  • Helicopter Rescue-Units of oil platforms or offshore wind parks
  • Diving groups
  • Long-Term regattas with air support
  • Charter units

 

Z

Highlights

  • water-resitant, shock-proof
  • easy to open and close with two big cover flaps
  • internal AIS receiver with WIFi module
  • exterior plugs for power supply, GPS antenna and VHF antenna
P

What is needed?

Which requests for INFOBOX?

The easyINFOBOX has to be connected to the DC power supply. The external VHF antenna has to be connected as well. The used mobile device needs AIS capable software or app to deal with the NMEA0183 data and show them on the display.

Technical Data

  • (L) 29 cm x (W) 23 cm x (H) 9,5 cm
  • Weight: 1,5 Kg
  • Operating temparature range: -20°C to 55°C
  • AIS receiver with 161,975 MhZ and 162,025 Mhz

Product pictures

DOWNLOADS

 

Select Language
Back to top