A174 easyRX2S

p

Product information

  • AIS Receiver for Class A and Class B signals

EAN

4260276741748

Product pictures

A181 easyRX2S-LAN

p

Product information

  • AIS Receiver for Class A and Class B signals
  • Incl. LAN module, for direct connection to an existing computer network

EAN

4260276741816

Product pictures

A21100 raspAIS

AIS Receiver    |       Product overview     |    FAQ   |   Deutsch |

l

Function

The new raspAIS from Weatherdock is equipped with a latest generation 2-channel-receiver for parallel and persistant reception of the two AIS frequencies.

The unit picks up all kind of AIS signals:
AIS Class A, AIS Class B, AIS SART, AIS MOB as well as AtoN signals will be received out of the vicinity.

A low power consumption management ensures that as less power as possible will be used running the system.

The collected data will be interpreted and forwarded to a connected mobile device for displaying on an electronic chart.

As the central basic component a Raspberry Pi® Modell 3B is doing a perfect job in the background. Due to the wide range of possible connectivity, received AIS data can be forwarded via WiFi or LAN connection.

Technical Data

  • 2-Channel VHF receiver for both AIS frequencies
  • Connection port for mobile AIS antenna
  • Connection ports for USB, LAN, HDMI & 3,5mm audio-out
  • WiFi and LAN connectivity
  • Pre-installed AIS software „openPlotter“
  • based on Raspberry PI® Modell 3B
  • palm-sized housing: 85 x 56 x 45mm
  • only 150g weight
  • external GPS source required
Z

Highlights

  • Real parallel AIS reception mode on both AIS
    frequencies (161,025 MHz + 162,025 MHz)
  • High channel sensivity
  • Multi-Port data output
  • HDMI port
  • AUX output for speaker
  • LAN and WiFi connectivity
  • Pre-installed AIS capable software
  • Less power consumption
l

How to run

With the received AIS data there are several ways to work with the raspAIS for display and navigation:

  • via WiFi connection to a smartphone or table
    The used mobile device has to be connected to the WiFi network of the raspAIS. Within the AIS capable app on the mobile device IP and port of the raspAIS has to figured in.
  • via HDMI conection to a PC or TV screen
    The integrated AIS software running in the background is managing all neccessary steps to display the position reports of all abjects around you. PC or TV screen is used as huge display.
  • via WiFi connection to a smartphone or table without AIS app
    With a free of charge software running on the used mobile device you will be able to mirroring the raspAIS display. Just connect the mobile device to the WiFi network of the raspAIS.

But the new raspAIS is even more than an AIS receiver. It can also be used as a multimedia center for videos and audio content. 4 USB slots keep enough space for USB storage additional connected to mouse and keyboard.

EAN

4260276740345

DOWNLOADS

A181 easyRX2 S-LAN

AIS Receiver    |       Product overview     |    FAQ

 A181 easyRX2 S-LAN

l

Function

Like any AIS receiver, the easyRX-LAN receives the telegrams of the Class A and Class B transceivers. A novelty of the easyRX-LAN is the LAN module, which enables a direct connection to an existing computer network. Likewise, the recording of the NMEA data into the WWW can be realized without any detours.

What is necessary to connect an easyRX LAN?

 

First, there must be a working computer network. In addition to a 12 volt DC power supply you need a standard LAN cable RJ45 and an VHF antenna.

 

Which PC software is the easyRX-LAN suitable for?

 

Any PC software that can process and display AIS data is suitable to be used with the easyRX LAN.

 

To configure the easRX-LAN, a PC is required. (at least WIN XP or higher)

 

Z

Highlights

  • LAN output and serial interface type NMEA 0183
  • 12 volt plug included
  • Forwarding of NMEA data possible
    • in local network
    • in www
  • Installation easyRX LAN via IP address (DHCP or fixed IP)
  • Possible applications
    • port authorities
    • Commercial shipping
    • Info stations along the shoreline

Technical Data

Receiver

  • 2 channel AIS receiver for AIS data on 161.975 MHz and 162.025 MHz frequencies
  • Channel spacing: 25 kHz
  • Sensitivity: -113 dBm
  • Datarate:   9600 Bps
  • Antenna impedance:   50 Ohm
  • Electrical connection data
    • Antenna input:   PL
    • LAN connection:   RJ45

Output:

  • Data transfer rate:   38,4 kB
  • Format:   NMEA 0183
  • NMEA telegram type: VDM

Dimensions

 

 

  • Baudrate: changable 38400 or 4800, bidirectional
  • NMEA Telegramtype : VDM
  • Connector VFH antenna: 50 Ohm, SO2239
  • Connector GPS antenna: 50 Ohm, BNC
  • Cabin mounting, IP60, -25°C – 55°C
  • 198mm (L) 158mm (W) 47mm (H)
  • Weight: 275 g.

EAN

4260276741816

DOWNLOADS

A206 AIS Receiver Terminal

Deutsch |

AIS Receiver Terminal

E

AIS Receiver Terminal (A206)

p

Product information

Full AIS coastal station designed in a standard industrial 19“ housing – „ready to rack“

The new Weatherdock AIS Receiver Terminal contains a full functionable AIS receiving unit which enables to be used as coastal station for regular AIS traffic control as well as special object tracking and monitoring in local areas.

Function
By means of the 2 channel receiver unit inside, the AIS Receiver Terminal is ready to be used as coastal station for all kind of monitoring and tracking requests.
LAN as well as USB connectivity allow to forward incoming AIS data in local or server-based networks all over the world.
With the standardized 19“ rack housing the AIS Receiver Terminal will fit into commercial behaviour and authority control center work.
With connection to external GPS antenna own position will be defined precizely.
The AIS Receiver Terminal will be a very cost effective solution for new coastal station projects.

Z

Highlights

  • Full functionable AIS receiving unit
  • Standardized 19“ rack housing fit into commercial behaviour and authority control center work
  • Very cost effective solution
P

What is needed?

What is needed to run the AIS Receiver Terminal?
To use the AIS Receiver Terminal in the best way, you only need to connect the unit to external GPS antenna and to VHF antenna used for AIS traffic.
To forward the incoming AIS data connection to server network via LAN is easy to establish.

Technical Data

  • 2 Channel AIS Receiver
  • Standardized 19“ rack
  • LAN connectivity possible
  • USB connectivity possible
  • external GPS antenna connection via plug
  • 8 LED functionality display

Product pictures

DOWNLOADS

 

easyRX2S

Deutsch |

easyRX2 S

E

easyRX2S

p

Product information

Function

The Class B unit easyRX2S receives AIS ClassA and ClassB according to ClassB standard.

The easyRX2S performs a lot of usefull features:
By means of USB port connection to PC or Laptop is possible. With contained software it can be choosen between 38400 or 4800 Baud data rate. Function activity is shown by 8 LED’s.  The easyRX2S is able to interpret incomming AIS data for CPA alert or AIS S.A.R.T. ermergency messages. Additional the easyRX2S devices can be used as power surce for external alerting devices. All received AIS data can be stored with internal SD Card recorder. With the build-in multiplexer input 3 devices with different baud rate can be pluged to the easyRX2S units. At least the external cable harness gives the possibility for outsourcing functionaly like “change into silent mode ” or “PAN PAN emergency call” by switch.

easyRX2S and gadgets that fit together

Your PC has to work at least on WIN XP SP2 and screen resolution  1024*768 for configuration. Plotter or PC software have to be intermateable to AIS to display incoming AIS data on screen.

Z

Highlights

  • Additional USP port for more connectivity
  • 38400 or 4800 Baud rate selection possible by software
  • 8 operating LEDs for more convenience
  • SD Card recorder for blackbox employment
  • Enlarged voltage input
  • Integrated multiplexer
  • Separate cable harness for “silent mode” or “PAN PAN” persistent signal
  • Plotter independent CPA alert
  • Plotter independent AIS S.A.R.T. alert
P

What is needed?

What is needed to run the easyRX2S?

The ClassB device needs a separate GPS antenna and an own VHF antenna. As an alternative you can run the easyRX2S with the VHF antenna switch easySPLIT-OCB for using your existing VHF antenna. A separate GPS antenne is still needed. An other alternative is the VHF/GPS combi antenna.

Technical Data

  • AIS receiver with integrated GPS receiver
  • 2 receiver
  • Responsivity: -107dBm minimum, typically -112dBm
  • Data rate: 38400 or 4800 Baud, bi-directional
  • NMEA telegram type: VDM
  • Adapter VFH antenna: 50 Ohm, SO2239
  • Adapter GPS antenna: 50 Ohm, BNC
  • Cabin mounting, IP60, -25°C – 55°C
  • Dimensions: 198mm (L) 158mm (W) 47mm (H)
  • Weight: approx. 275 grams
  • LAN-Module (optional)

Advantages over competitors

  • Plotter independent AIS S.A.R.T. alert
  • Plotter independent CPA alert
  • USB port
  • SD Card recorder

Product variants

A025 easyAIS

Running out mid/end 2017!
Service for this equipment continues!

Functionality:
The easyAIS receives the AIS VHF radio signals, most sent by commercial vessels (but also from an increasing figure of pleasure boaters). These signals then proceed into a NMEA Signal which can be interpreted from the latest chart plotter or PC software.

What is necessary to use the easyAIS 2nd Generation?
” You need to have your own VHF antenna. As an alternative you can use the easySPLIT, with which you can connect the existing VHF antenna for the reception of the AIS.

Which Chart plotter/PC software fits together with the easyAIS?:
” Most of the new chart plotters or PC software are capable to display AIS data on the screen. Nevertheless please check with your distributor whether your chart plotter/PC software is capable and can manage and display incoming NMEA data.

  • 2 channel receiver to receive AIS data on 161,975MHz and 162,025 MHz
  • Sensitivity: -112dBm (Therefore -3dBm better than the norm for class A receivers!!)
  • Channel spacing: 25kHz
  • Enlarged power input: 9VDC-28VDC, 80mA
  • Anschluss: 9V – 28 VDC, 80 mA
  • Antenna connector: BNC socket. 50 Ohm
  • Baud rate: 38,4kB (optional 4,8kB by means of a jumper setting)
  • NMEA output message: VDM
  • Ambient conditions: under deck, 0°C to 60°C
  • 140mm (l) x 140mm (w) x 35mm (h)
  • Weight: app. 400 gr
  • Integrated multiplexer up converting from 4,8kB to 38,4kB
  • 2 channel AIS receiver with newest micro processor (µP) technology
  • Highest sensitivity at optimized selectivity
  • Integrated multiplexer up converting from 4,8kB to 38,4kB
  • Enlarged DC Power Input
  • Article number A025

A043 easyAIS-IS

Running out mid/end 2017!
Service for this equipment continues!

Functionality:

The easyAIS receives the AIS VHF radio signals, actually most send by the commercial vessels (but also from an increasing figure of pleasure boaters). These signals are proceeded into a NMEA Signal which can be interpreted from the latest chart plotter or a PC software. The unit has got an integrated antenna – splitter and this makes the installation of the unit to the existing VHF antenna very easy. By means of the integrated splitter with integrated RF-signal amplifier physical losses are eliminated, which is unique in nowadays market.

What is necessary to use the easyAIS-IS Generation?

There is necessary the own existing VHF antenna and nothing more. The VHF Radio as well as the regular radio can be connected to the easyAIS-IS.

Which Chart plotter/PC software fits together with the easyAIS?

Most of the nowadays new chart plotters or PC software are capable to show AIS data on the screen.

  • 2 channel receiver to receive AIS data on 161,975 MHz and 162,025 MHz Class A and Class B
  • Sensitivity: -112 dBm (Therefore – 3 dBm better than the norm for Class A receivers)
  • Channel spacing: 25 kHz
  • Frequency selective antenna splitter with the possibility to connect to the easyAIS-IS:
    • VHF Antenna, 50 Ohm, SO239
    • VHF radio (IN/OUT): 50 Ohm, SO239
  • Regular radio: 50 Ohm, BNC for frequencies from app. 150 kHz to 110 MHz
  • Power: 9 v – 28 VDC, @ < 150 mA (Average of different modes)
  • NMEA 0183 output, message type VDM
  • USB output for direct connection to PC
  • Multiplex input for GPS data to pass through upconverted GPS data from 4800 Baud to 38400 Baud
  • Ambient conditions: under deck, 0° C to 60° C
  • 150 mm (l) x 150 mm (w) x 35 mm (h))
  • 2 channel AIS receiver with newest micro processor (ìP) technology
  • Highest sensitivity at optimized selectivity
  • Enlarged DC power input 9V – 28V
  • Integrated splitter with integrated RF-signal amplifier
  • Connection of the easyAIS-IS to the existing VHF antenna
  • moreover there can be connected: VHF Radio, Regular radio, long wave up to VHF
  • Article number A043

A071 easyAIS-WiFi

Running out mid/end 2017!
Service for this equipment continues!

Weatherdock WiFi products are a quantum jump regarding the simplification of data use aboard. With the built-in WiFi module, an additional navigation place is created on your boat. Received AIS data are wirelessly linked to your mobile device. The latter can be a smartphone, tablet PC , iPhone or iPad.

To visualize data on your mobile device, Weatherdock offers a free App named “easyAIS”, which is available for download through the Apple store.

In case you are running a mobile device with lower screen resolution, we still recommend to use a suitable plotter with appropriate resolution for your safety.

Function:

The easyAIS-WiFi receives the incoming AIS data sent by commercial vessels (Class A) and pleasure boats (Class B). These telegrams are processed into a NMEA protocol which can be interpreted by chart plotters or PC software. With the wireless link to your mobile device, these data will be promptly received there as well.

Running the “easyAIS” app, you will see a radar screen appearing, showing allreceived AIS targets within range. A click on a target will prompt you detailed information to this specific target, such as ship’s name, speed and course over ground, etc. Additional information to your own boat’s navigational status like your own speed, course, wind, etc. are available through sub-menues of the App, if you feed the easyAIS-WiFi built-in multiplexer with boat information.

  • fully compatible with popular AIS navigational Apps for iPad®, iPhone® or iPod®, e.g.
  • – iNavX (charged) A new license for mobile device is mandatory.
  • – AIS Radar (charged)
  • – iPilot (charged)
  • fully compatible to charged Android-App iRegatta
  • fully compatible to Windows XP, Vista or Windows 7 (system running 32 bit)

What is necessary to use the easyAIS_Wifi?

Required is an AIS compatible chart plotter or PC software and an own VHF antenna. As an alternative you can use a VHF/AIS antenna splitter like the easySPLIT to use the already existing VHF antenna for both, the VHF radio communication and the AIS reception.
The mobile device has to have AIS compatible software or App too.

AIS-App is now available in Appstore!

  • integrated Wifi module
  • provides wireless TCP/IP, NMEA 0183 (34800 baud)
  • NMEA input with multiplexer function for GPS and other boat instrument data
  • WiFi range of 30 m without any special antennas (depending on local conditions)
  • fully compatible with popular navigational software or Apps for iPhone or iPad

AIS receiver

  • dual chanel receiver on 161,975 MHz and 162,025 MHz
  • 25 kHz chanel spacing
  • -112 dBm RX sensitivity

Requirements for the DC supply

  • 9 V – 28 VDC
  • 250 mA

NMEA input

  • multiplexes NMEA data at a data rate of 4800 baud with internal AIS data

NMEA output

  • NMEA 0183 (34800 baud)
  • NMEA message type: VDM

WiFi

  • maximum range: 100 m (in free air)
  • usual range: approx. 30 m without the use of any special antenna
  • maximum number of WiFi users: 1

Antennas

  • connection to existing VHF antenna required
  • Wifi antenna supplied

integrated WiFi module
provides wireless TCP/IP, NMEA 0183 (34800 baud)
NMEA input with multiplexer function for GPS and other boat intrument data
WiFi range of 30 m without any special antennas (depending on local conditions)

fully compatible with popular AIS navigational Apps for iPad®, iPhone® or iPod®, e.g.

  • iNavX (charged) A new license for mobile device is mandatory.
  • AIS Radar (charged)
  • iPilot (charged)

fully compatible to charged Android-App iRegatta
fully compatible to Windows XP, Vista or Windows 7 (system running 32 bit)

A059 easyAIS-IS-WiFi

Running out mid/end 2017!
Service for this equipment continues!

AIS goes mobile for more convenience aboard!

Weatherdock WiFi products are a quantum jump regarding the simplification of data use aboard. With the built-in WiFi module, an additional navigation place is created on your boat. Received AIS data are wirelessly linked to your mobile device. The latter can be a smartphone, tablet PC , iPhone or iPad.

To visualize data on your mobile device, Weatherdock offers a free App named “easyAIS”, which is available for download through the Apple store.

In case you are running a mobile device with lower screen resolution, we still recommand to use a suitable plotter with appropriate resolution for your safety.

Function:

The easyAIS-IS_WiFi receives the incoming AIS data sent by commercial vessels (Class A) and pleasure boats (Class B). These telegrams are processed into a NMEA protocol which can be interpreted by chart plotters or PC software. With the wireless link to your mobile device, these data will be promptly received there as well. The integrated antenna splitter allows you to share the existing VHF aerial for both, the VHF radio communication and the AIS reception.

Running the “easyAIS” app, you will see a radar screen appearing, showing all received AIS targets within range. A click on a target will prompt you detailed information to this specific target, such as ship’s name, speed and course over ground, etc.

fully compatible with popular AIS navigational Apps for iPad®, iPhone® or iPod®, e.g.
– iNavX (charged) A new license for mobile device is mandatory.
– AIS Radar (charged)
– iPilot (charged)
fully compatible to charged Android-App iRegatta
fully compatible to Windows XP, Vista or Windows 7 (system running 32 bit)

What is necessary to use the easyAIS-IS_Wifi?

Required is an AIS compatible chart plotter or PC software. The mobile device has to have AIS compatible software or App too.

AIS-App is now available in Appstore!
Also available for Android now!

  • integrated Wifi module
  • provides wireless TCP/IP, NMEA 0183 (34800 baud)
  • WiFi range of 30 m without any special antennas (depending on local conditions)
  • fully compatible with popular navigational software or Apps for iPhone or iPad
  • integrated VHF/AIS antenna splitter

AIS receiver

  • dual channel receiver on 161,975 MHz and 162,025 MHz
  • 25 kHz channel spacing
  • -112 dBm receiver sensitivity

Requirements for the DC supply

  • 9 V – 28 VDC
  • 350 mA

NMEA input

  • multiplexes GPS NMEA data at 4800 Baud with the internally processed AIS data

NMEA output

  • NMEA 0183 (34800 baud)
  • NMEA message type: VDM

PC connection

  • USB (driver supplied)
  • compatible to Windows, Linux and Mac

WiFi

  • maximum range: 100 m (in free air)
  • usual range: approx. 30 m without the use of any special antenna
  • maximum number of Wifi users: 1

Antennas

  • connection to existing VHF antenna required
  • WiFi antenna supplied

integrated WiFi module
provides wireless TCP/IP, NMEA 0183 (34800 baud)
WiFi range of 30 m without any special antennas (depending on local conditions)
fully compatible with popular navigational software or Apps for iPhone or iPad
integrated VHF/AIS antenna splitter

fully compatible with popular AIS navigational Apps for iPad®, iPhone® or iPod®, e.g.
– iNavX (charged) A new license for mobile device is mandatory.
– AIS Radar (charged)
– iPilot (charged)
fully compatible to charged Android-App iRegatta
fully compatible to Windows XP, Vista or Windows 7 (system running 32 bit)

A105 easyAIS-IS-N2K

Running out mid/end 2017!
Service for this equipment continues!

The easyAIS-IS-N2K receives all AIS data send out on special VHF frequencies. Beside commercial vessels there is an increasing figure of pleasure boats using AIS technology to inform other vessels about their curse and speed over ground.

Take the “guess work” out of your navigation and see what’s going on around you. This will increase your safety level aboard.

Function

The easyAIS receives the AIS VHF radio signals, actually most send by the commercial vessels (but also from a increasing figure of pleasure boaters). This signals are proceeded into an NMEA Signal which can be interpreted from the latest chart plotter or a PC software. The unit has got an integrated splitter and this made the installation of the unit to the existing VHF antenna very easy.

By means of the integrated splitter with incoming signal amplifier physical losses are eliminated, which is unique in nowadays market.

New:

The integrated NMEA2000 Adapter is the new part of this AIS transceiver unit. This enables to connect this AIS transceiver into the latest NMEA2000 network standard aboard.

What is necessary to use the easyAIS-IS Generation?

There is necessary the own existing VHF antenna and nothing more.The VHF Radio as well as the regular radio can be connected to the easyAIS-IS.

Which Chart plotter/PC software fits together with the easyAIS?

Most of the nowadays new chart plotters or PC software are capable to show AIS data on the screen.

  • 2 channel AIS receiver with newest micro processor (μP) technology
  • Highest sensitivity at optimized selectivity
  • Enlarged DC power input 9v-28V
  • Integrated splitter with incoming signal amplifier
  • Connetion of the easyAIS-IS to the existing VHF antenna:
  • moreover there can be connected:

VHF Radio
Regular radio, short wave up to VHF wave

  • 2 channel receiver to receive AIS data on 161,975 MHz and 162,025 MHz Class A and Class B
  • Sensitivity: -112 dBm (Therefore – 3 dBm better than the norm for Class A receivers!!)
  • Channel spacing: 25 kHz
  • Frequency selective power divider with the possibility to connect to the easyAIS-IS:
    • VHF Antenna, 50 Ohm, SO239
    • VHF radio (IN/OUT): 50 Ohm, SO239
    • Regular radio: 50 Ohm, BNC for frequencies from app. 150kHz zo 110MHz
  • Power: 9 v – 28 VDC, @ < 150 mA (Average of different modes)
  • NMEA 0183 output, message type VDM
  • USB output for direct connection to PC
  • Multiplex input for GPS data to pass through upconverted GPS data from 4800 Baud to 38400 Baud
  • Ambient conditions: under deck, 0° C to 60° C
  • 150 mm (l) x 150 mm (w) x 35 mm (h)
  • Weight: app. 400 g
  • 2 Chanel AIS receiver
  • AIS data on chart plotter or PC screen
  • Integrated VHF splitter with preamplifier
  • Integrated NMEA2000 adapter
  • Easy installation by “plug’n’play”

A135 easyINFOBOX mobile

Deutsch |

A135 easyINFOBOX mobile

E

easyINFOBOX mobile

p

Product information

Independent AIS System for mobile applications

The easyINFOBOX by Weatherdock AG is a shock-proof PP/ABS box with an integrated AIS receiver. It‘s the robust, dust- and water-resistant housing for a AIS unit, receiving AIS signals from the ambient vessels which can be displayed by a mobile device. The easyINFOBOX is designed for the mobile usage of AIS data. By means of the DC plug power supply of every board net can be used. The box has exterior plugs for GPS and VHF antennas. The internal AIS unit has got a WiFi module, transmitting the data to a connected mobile device like an iPad, Tablet or Laptop. With an AIS capable software or app the received AIS data with the relevant information can be shown on the screen.

Function The AIS unit inside the easyINFOBOX  receives AIS data within a range of up to 25 miles via the connected VHF antenna. The received data are translated into  NMEA0183 protocols and transmitted to the used mobile devices like iPad, Tablet PC or Laptop. These units are getting the NMEA0183 protocols by means of WiFi TCP/IP connection in a peer-to-peer network. Required is an AIS capable software or app running on the mobile device, as well as the correspondent maps. By connecting the external GPS antenna, the AIS unit receives it‘s own GPS position.

Applications

  • Helicopter Rescue-Units of
  • oil platforms or offshore wind parks
  • Diving groups
  • Long-Term regattas with air support
  • Charter units
Z

Highlights

  • Water-resitant, shock-proof
  • easy to carry by means of two handles
  • internal AIS receiver with WiFi module
  • exterior plugs for power supply, GPS antenna and VHF antenna
  • exterior WiFi antenna

Technical Data

  • Dimensions:
  • (L) 29 cm x (W) 23 cm x (H) 9,5 cm
  • Weight: 1,5 Kg
  • Operating temperature range:
  • -20°C to 55°C
  • AIS receiver with 161,975 MHz and 162,025 MHz
  • WiFi
  • peer-to-peer-connection
  • maximum range in free air: 100m
  • usual range: approx. 30m
  • with our new WiFi function it is possible to have up to 40 clients (terminals).

Product pictures

A053 easyINFOBOX

Deutsch |

A053 easyINFOBOX

E

easyINFOBOX

p

Product information

The easyINFOBOX-Diving developed by Weatherdock is a shock-proof PP/ABS box with an integrated AIS receiver for diving groups. Is‘s the robust, dust- and water-resistant housing for a AIS unit, receiving the signals from the activated easyDIVEPOS units of the group members which can be displayed by a integrated Chart Plotter. The easyINFOBOX is designed for the mobile usage of AIS data. By means of the DC plug power supply of every board net can be used. The box has exterior plugs for GPS and VHF antennas.

Function The AIS unit inside the easyINFOBOX Divi9ng receives via the connected VHF antenna transmitted signals within a distance of up to 12 nautical miles. The range depends on the receiving height of the VHF antenna. The received data are translated into a NMEA0183 protocols and is transmitted to the Chart Plotter. By connecting the external GPS antenna, the AIS unit receives it‘s own GPS position

Applications

  • Helicopter Rescue-Units of oil platforms or offshore wind parks
  • Diving groups
  • Long-Term regattas with air support
  • Charter units

 

Z

Highlights

  • water-resitant, shock-proof
  • easy to open and close with two big cover flaps
  • internal AIS receiver with WIFi module
  • exterior plugs for power supply, GPS antenna and VHF antenna
P

What is needed?

Which requests for INFOBOX?

The easyINFOBOX has to be connected to the DC power supply. The external VHF antenna has to be connected as well. The used mobile device needs AIS capable software or app to deal with the NMEA0183 data and show them on the display.

Technical Data

  • (L) 29 cm x (W) 23 cm x (H) 9,5 cm
  • Weight: 1,5 Kg
  • Operating temparature range: -20°C to 55°C
  • AIS receiver with 161,975 MhZ and 162,025 Mhz

Product pictures

DOWNLOADS

 

Select Language
Back to top