A142 easyTRX2S

EAN

4260276741427

Function

The ClassB unit easyTRX2S receives AIS ClassA and ClassB signals and transmits its own data according to ClassB standard. All the easyTRX2S series have a great variety of applications: You can connect it to a PC or laptop through a USB port. Using a software, you can choose the speed transmission between 38400 or 4800 Baud data rate. Function activity is shown by 8 LED’s.  The easyTRX2S is able to interpret incoming AIS data for CPA alert or AIS S.A.R.T. emergency messages. Additionally, the easyTRX2S devices can be used as power source for external alerting devices. All received and transmitted AIS data can be stored in and internal SD Card recorder. With the build-in multiplexer input, 3 devices with different baud rate can be plugged to the easyTRX2S units. The external cable gives the possibility to choose between “silent mode” or “PAN PAN emergency call”.

What is needed to run the easyTRX2S?

The ClassB device needs a separate GPS antenna and its own VHF antenna. As an alternative you can run the easyTRX2S with the VHF antenna switch easySPLIT-OCB. A separate GPS antenna is still needed. Another alternative is the VHF/GPS combi antenna.

easyTRX2S and gadgets that work together

Your PC has to work at least on WIN XP SP2 and screen resolution 1024*768. Plotter or PC software have to be AIS compatible in order to display incoming AIS data on the screen. A MMSI number is required to broadcast data.  You will get it from German Bundesamts fur Seeschifffahrt und Hydrographie or the competent authority on your country. Your distributor will set up this MMSI on your device.

  • Additional USB port for more connectivity
  • 38400 or 4800 Baud rate selection possible by software
  • 8 operating LEDs for more convenience
  • SD Card recorder for blackbox employment
  • Enlarged voltage input
  • Integrated multiplexer
  • Separate cable harness for “silent mode” or “PAN PAN” persistent Signal
  • Plotter independent CPA alert
  • Plotter independent AIS S.A.R.T. alert
  •  AIS receiver and transmitter with integrated GPS receiver
  • 1 transmitter, 2 receiver
  • Responsivity: -107dBm minimum, typically -112dBm
  • Data rate: 38400 or 4800 Baud, bi-directional
  • NMEA telegram type: VDM
  • Adapter VFH antenna: 50 Ohm, SO2239
  • Adapter GPS antenna: 50 Ohm, BNC
  • Cabin mounting, IP60, -25°C – 55°C
  • Dimensions: 198mm (L) 158mm (W) 47mm (H)
  • Weight: approx. 275 grams
  • Plotter independent AIS S.A.R.T. alert
  • Plotter independent CPA alert
  • USB port
  • SD Card recorder

A143 easyTRX2S-WiFi

EAN

4260276741434

 

The ClassB unit easyTRX2S receives AIS ClassA and ClassB signals and transmits its own data according to ClassB standard.

All the easyTRX2S devices have a great variety of applications: You can connect it to a PC or laptop through a USB port. Using a software, you can choose the speed transmission between 38400 or 4800 Baud data rate. Function activity is shown by 8 LED’s.  The easyTRX2S is able to interpret incoming AIS data for CPA alert or AIS S.A.R.T. emergency messages. Additionally, the easyTRX2S devices can be used as power source for external alerting devices. All received and transmitted AIS data can be stored in and internal SD Card recorder. With the build-in multiplexer input, 3 devices with different baud rate can be plugged to the easyTRX2S units. The external cable gives the possibility to choose between “silent mode” or “PAN PAN emergency call”.

To visualize data on your mobile device, Weatherdock offers a free App named “easyAIS”, which is available for download through the Apple store.

In case you are running a mobile device with lower screen resolution, we still recommend to use a suitable plotter with appropriate resolution for your safety.

Function:

The easyTRX2S-WiFi receives the incoming AIS data sent by commercial vessels (Class A) and pleasure boats (Class B). These telegrams are processed into a NMEA protocol which can be interpreted by chart plotters or PC software. With the wireless link to your mobile device, these data will promptly be received there as well.

The easyTRX2S-WiFi transmits according the AIS-Class B standard all own AIS data like ship name, speed and course over ground, etc. to every AIS receiver or transceiver within its radio range. Using the easyTRXS2-WiFi is the simplest way to make yourself visible to others, having all necessary information about your surrounding too.

Running the “easyAIS” App, you will see a radar screen appearing, showing all received AIS targets within range. A click on a target will provide you detailed information about this specific target, such as ship’s name, speed and course over ground, etc. Additional information about your own boat’s navigational status like your own speed, course, wind, etc. are available through sub-menus of the App, if you feed the easyTRX2S-WiFi built-in multiplexer with boat information.

fully compatible with popular AIS navigational Apps for iPad®, iPhone® or iPod®, e.g.
– iNavX (charged) A new license for mobile device is mandatory.
– AIS Radar (charged)
– iPilot (charged)
fully compatible to charged Android-App iRegatta
fully compatible to Windows XP, Vista or Windows 7 (system running 32 bit)

What is needed to run the easyTRX2S?

The ClassB device needs a separate GPS antenna and its own VHF antenna. As an alternative you can run the easyTRX2S with the VHF antenna switch easySPLIT-OCB to use your existing VHF antenna. A separate GPS antenna is still needed. Another alternative is the VHF/GPS combi antenna.

easyTRX2S and gadgets that work together

Your PC has to work at least on WIN XP SP2 and screen resolution  1024*768 for configuration. Plotter or PC software have to be AIS compatible to display incoming AIS data on the screen. A MMSI number is required to broadcast data – you will get it from German “Bundesnetzagentur” or the competent authority on your country. Your distributor will program this number on your easyTRX2S.

New WiFi function

40 clients at the same time by Multi-User-Connection AIS and Internet at the same time

  • AIS data by WiFi from easyTRX2S to a router with internet connection
  • AIS data & internet available on all devices connected to the router (e.g. WiFi from harbour, own 3G/4G hotspot aboard)

Weatherdock App easyAIS im AppleStoreWeatherdock App in GooglePlay

 

 

  • Additional USB port for more connectivity
  • 38400 or 4800 Baud rate selection possible by software
  • 8 operating LEDs for more convenience
  • SD Card recorder for blackbox employment
  • Enlarged voltage input
  • Integrated multiplexer
  • Separate cable harness for “silent mode” or “PAN PAN” persistent signal
  • Plotter independent CPA alert
  • Plotter independent AIS S.A.R.T. alert
  • WiFi range of 30 m without any special antennas (depending on local conditions)
  • fully compatible with popular navigational software or Apps for iPhone or iPad

 

 

  • AIS receiver and transmitter with integrated GPS receiver
  • 1 transmitter, 2 receiver
  • Responsivity: -107dBm minimum, typically -112dBm
  • Data rate: 38400 or 4800 Baud, bi-directional
  • NMEA telegram type: VDM
  • WiFi maximum range: 100 m (in free air)
  • WiFi usual range: approx. 30 m without the use of any special antenna
  • maximum number of WiFi users: 1
  • Adapter VFH antenna: 50 Ohm, SO2239
  • Adapter GPS antenna: 50 Ohm, BNC
  • Cabin mounting, IP60, -25°C – 55°C
  • Dimensions: 198mm (L) 158mm (W) 47mm (H)
  • Weight: approx. 275 grams

 

 

  • Plotter independent AIS S.A.R.T. alert
  • Plotter independent CPA alert
  • USB port
  • SD Card recorder
  • WiFi connection for more convenience in navigation

A147 easyTRX2S-iGPS-N2K-WiFi

EAN

4260276741472

 

The ClassB unit easyTRX2S-IGPS-N2K-WiFi receives AIS ClassA and ClassB signals and transmits its own data according to ClassB standard. The received data telegrams are processed into a NMEA protocol which can be interpreted by chart plotters or PC software.

Function

All the easyTRX2S series are performing with a lot of useful features:

By means of USB port connection to PC or Laptop is possible. With the software, one can chose between 38400 or 4800 Baud data rate. Function activity is shown by 8 LED’s.  The easyTRX2S is able to interpret incoming AIS data for CPA alert or AIS S.A.R.T. emergency messages. Additionally, the easyTRX2S devices can be used as power source for external alerting devices. All received and transmitted AIS data can be stored with internal SD Card recorder. With the build-in multiplexer input 3 devices with different baud rate can be plugged to the easyTRX2S units. At least the external cable harness gives the possibility for outsourcing functionally like “change into silent mode ” or “PAN PAN emergency call” by switch.

The integrated GPS antenna is the new part of this AIS transceiver unit. This reduces the need of an external GPS antenna mounted on deck if the easyTRX2-iGPS-N2K-WiFi is going to be used in Polyester boats.

For stainless steel vessels this unit is not useful. Here you have to connect a separate GPS antenna to the unit. The integrated NMEA2000 Adapter enables to connect this AIS transceiver into the latest NMEA2000 network standard aboard.

With the wireless link to your mobile device, these data will promptly be received there as well.

Running the “easyAIS” App, you will see a radar screen appearing, showing all received AIS targets within range. A click on a target will prompt you detailed information to this specific target, such as ship’s name, speed and course over ground, etc. Additional information to your own boat’s navigational status like your own speed, course, wind, etc. are available through sub-menus of the App, if you feed the easyTRX2S-WiFi built-in multiplexer with boat information.

fully compatible with popular AIS navigational Apps for iPad®, iPhone® or iPod®, e.g.
– iNavX (charged) A new license for mobile device is mandatory.
– AIS Radar (charged)
– iPilot (charged)
fully compatible to charged Android-App iRegatta
fully compatible to Windows XP, Vista or Windows 7 (system running 32 bit)

What is needed to run the easyTRX2S-IGPS-N2K-WiFi?

The ClassB device needs to have its own GPS and VHF antennas. As an alternative you can run the easyTRX2S with the VHF antenna switch easySPLIT-OCB for using your existing VHF antenna. A separate GPS antenna is still needed. Another alternative is the VHF/GPS combi antenna.

easyTRX2S-IGPS-N2K-WiFi and gadgets that work together

Your PC has to work at least on WIN XP SP2 and screen resolution 1024*768 for configuration. Plotter or PC software have to be AIS compatible to display incoming AIS data on screen. A MMS number is required to broadcast data – you will get it from German “Bundesnetzagentur” or the competent authority on your country. Your distributor will program your easyTRX2S for that MMSI number. By means of the NMEA2000 adapter the unit can be connected to all devices running with this NMEA standard.

New WiFi function

 

 

 

 

40 clients at the same time by Multi-User-Connection AIS and Internet at the same time

AIS data by WiFi from easyTRX2S to a router with internet connection AIS data & internet available on all device´s connected to the router(e.g. WiFi from harbour, own 3G/4G hotspot aboard)

 

 

 

 

 

  • Integrated GPS antenna for polyesther boats
  • Integrated NMEA2000 adapter
  • Additional USB port for more connectivity
  • 38400 or 4800 Baud rate selection possible by software
  • 8 operating LEDs for more convenience
  • SD Card recorder for blackbox employment
  • Enlarged voltage input
  • Integrated multiplexer
  • Separate cable harness for “silent mode” or “PAN PAN” persistent signal
  • Plotter independent CPA alert
  • Plotter independent AIS S.A.R.T. alert
  • WiFi range of 30 m without any special antennas (depending on local conditions)
  • fully compatible with popular navigational software or Apps for iPhone or iPad

 

 

  • AIS receiver and transmitter with integrated GPS receiver
  • 1 transmitter, 2 receiver
  • Responsivity: -107dBm minimum, typically -112dBm
  • Data rate: 38400 or 4800 Baud, bi-directional
  • NMEA telegram type: VDM
  • WiFi maximum range: 100 m (in free air)
  • WiFi usual range: approx. 30 m without the use of any special antenna
  • maximum number of Wifi users: 1
  • Adapter VFH antenna: 50 Ohm, SO2239
  • Adapter GPS antenna: 50 Ohm, BNC
  • Integrated GPS antenna with built-in pre-amplifier
    • Type:                    Quadrifilar helix
    • Polarisation:          Right Hand Circular Polarized (RHCP)
    • 3dB beamwidth:     min 135°
    • Gain (zenith):        18dB
    • Noise figure:          0.8dB
  • Cabin mounting, IP60, -25°C – 55°C
  • Dimensions: 198mm (L) 158mm (W) 47mm (H)
  • Weight: approx. 275 grams

  • Integrated GPS antenna for polyester boats
  • Integrated NMEA2000 adapter
  • Integrated WiFi module
  • Plotter independent AIS S.A.R.T. alert
  • Plotter independent CPA alert
  • USB port
  • SD Card recorder
  • WiFi connection for more convenience in navigation

A148 easyTRX2S-IS

EAN

4260276741489

 

The ClassB unit easyTRX2S receives AIS ClassA and ClassB signals and transmits its own data according to ClassB standard.

Function

All the easyTRX2S series have a great variety of applications: You can connect it to a PC or laptop through a USB port. Using a software, you can choose the speed transmission between 38400 or 4800 Baud data rate. Function activity is shown by 8 LED’s.  The easyTRX2S is able to interpret incoming AIS data for CPA alert or AIS S.A.R.T. emergency messages. Additionally, the easyTRX2S devices can be used as power source for external alerting devices. All received and transmitted AIS data can be stored in and internal SD Card recorder. With the build-in multiplexer input, 3 devices with different baud rate can be plugged to the easyTRX2S units. The external cable gives the possibility to choose between “silent mode” or “PAN PAN emergency call”.

The integrated VHF antenna splitter enables to use an existing VHF for AIS and HF radio at the same time. Before the incoming signals are separated, the built-in pre-amplifier increases the signal strength to avoid physical loss.

What is needed to run the easyTRX2S-IS?

The Class B device needs a separate GPS antenna. Another alternative is the VHF/GPS combi antenna.

easyTRX2S-IS and gadgets that work together

Your PC has to work at least on WIN XP SP2 and screen resolution  1024*768 for configuration. Plotter or PC software have to be compatible with AIS to display incoming AIS data on the screen. A MMSI number is required to broadcast data – you will get it from German “Bundesnetzagentur” or the competent authority on your country. Your distributor will program your easyTRX2S for that MMSI number.

 

 

 

  • Additional USB port for more connectivity
  • 38400 or 4800 Baud rate selection possible by software
  • 8 operating LEDs for more convenience
  • SD Card recorder for blackbox employment
  • Enlarged voltage input
  • Integrated multiplexer
  • Separate cable harness for “silent mode” or “PAN PAN” persistent signal
  • Plotter independent CPA alert
  • Plotter independent AIS S.A.R.T. alert
  • Integrated VHF splitter with pre-amplifier

 

 

  • AIS receiver and transmitter with integrated GPS receiver
  • 1 transmitter, 2 receiver
  • Responsivity: -107dBm minimum, typically -112dBm
  • Data rate: 38400 or 4800 Baud, bi-directional
  • NMEA telegram type: VDM
  • Adapter VFH antenna: 50 Ohm, SO2239
  • Adapter GPS antenna: 50 Ohm, BNC
  • Cabin mounting, IP60, -25°C – 55°C
  • Dimensions: 198mm (L) 158mm (W) 47mm (H)
  • Weight: approx. 275 grams

  • VHF splitter with pre-amplifier
  • Plotter independent AIS S.A.R.T. alert
  • Plotter independent CPA alert
  • USB port
  • SD Card recorder

A153 easyTRX2S-IS-N2K

EAN

4260276741533

 

The ClassB unit easyTRX2S receives AIS ClassA and ClassB signals and transmits its own data according to ClassB standard.

Function

All the easyTRX2S series have a great variety of applications: You can connect it to a PC or laptop through a USB port. Using a software, you can choose the speed transmission between 38400 or 4800 Baud data rate. Function activity is shown by 8 LED’s.  The easyTRX2S is able to interpret incoming AIS data for CPA alert or AIS S.A.R.T. emergency messages. Additionally, the easyTRX2S devices can be used as power source for external alerting devices. All received and transmitted AIS data can be stored in and internal SD Card recorder. With the build-in multiplexer input, 3 devices with different baud rate can be plugged to the easyTRX2S units. The external cable gives the possibility to choose between “silent mode” or “PAN PAN emergency call”.

The integrated VHF antenna splitter enables to use an existing VHF for AIS and HF radio at the same time. Before the incoming signals are separated, the built-in pre-amplifier increases the signal strength to avoid physical loss.

The integrated NMEA2000 Adapter enables to connect this AIS transceiver into the latest NMEA2000 network standard aboard.

NMEA2000 is a new data form which enables to plug different devices in a row on the data stream. Each units takes his special data out of the stream. This is also called “BUS-system”.

Up to now devices communicated in data form NMEA0183. It was mandatory that all devices had to be connected directly with each other. With the new standard, the only thing to do is just to plug the unit into the NMEA2000 data stream.

All easyTRX2S devices with the appendix “N2K” do have an internal converter that is converting NMEA0183 into NMEA2000 and forwarding the new data form into the NMEA2000 network.

What is needed to run the easyTRX2S?

The Class B device needs a separate GPS antenna. As an alternative you can run the easyTRX2S with the VHF antenna switch easySPLIT-OCB for using your existing VHF antenna. A separate GPS antenna is still needed. Another alternative is the VHF/GPS combi antenna.

easyTRX2S and gadgets that fit together

Your PC has to work at least on WIN XP SP2 and screen resolution  1024*768 for configuration. Plotter or PC software have to be compatible with AIS to display incoming AIS data on the screen. A MMSI number is required to broadcast data – you will get it from German “Bundesnetzagentur” or the competent authority on your country. Your distributor will program your easyTRX2S for that MMSI number.

 

 

  • Integrated VHF splitter with pre-amplifier
  • Integrated NMEA2000 adapter
  • Additional USB port for more connectivity
  • 38400 or 4800 Baud rate selection possible by software
  • 8 operating LEDs for more convenience
  • SD Card recorder for blackbox employment
  • Enlarged voltage input
  • Integrated multiplexer
  • Separate cable harness for “silent mode” or “PAN PAN” persistent signal
  • Plotter independent CPA alert
  • Plotter independent AIS S.A.R.T. alert

 

  • AIS receiver and transmitter with integrated GPS receiver
  • 1 transmitter, 2 receiver
  • Responsivity: -107dBm minimum, typically -112dBm
  • Data rate: 38400 or 4800 Baud, bi-directional
  • NMEA telegram type: VDM
  • Adapter VFH antenna: 50 Ohm, SO2239
  • Adapter GPS antenna: 50 Ohm, BNC
  • Cabin mounting, IP60, -25°C – 55°C
  • Dimensions: 198mm (L) 158mm (W) 47mm (H)
  • Weight: approx. 275 grams

  • Integrated NMEA2000 converter
  • Plotter independent AIS S.A.R.T. alert
  • Plotter independent CPA alert
  • USB port
  • SD Card recorder

A149 easyTRX2S-IS-WiFi

EAN

4260276741496

 

The ClassB unit easyTRX2S receives AIS ClassA and ClassB signals and transmits its own data according to ClassB standard.

Function

All the easyTRX2S devices have a great variety of applications: You can connect it to a PC or laptop through a USB port. Using a software, you can choose the speed transmission between 38400 or 4800 Baud data rate. Function activity is shown by 8 LED’s.  The easyTRX2S is able to interpret incoming AIS data for CPA alert or AIS S.A.R.T. emergency messages. Additionally, the easyTRX2S devices can be used as power source for external alerting devices. All received and transmitted AIS data can be stored in and internal SD Card recorder. With the build-in multiplexer input, 3 devices with different baud rate can be plugged to the easyTRX2S units. The external cable gives the possibility to choose between “silent mode” or “PAN PAN emergency call”.

The integrated VHF antenna splitter enables to use an existing VHF for AIS and HF radio at the same time. Before the incoming signals are separated, the built-in pre-amplifier increases the signal strength to avoid physical loss.

The easyTRX2S-IS-WiFi receives the incoming AIS data sent by commercial vessels (Class A) and pleasure boats (Class B). These telegrams are processed into a NMEA protocol which can be interpreted by chart plotters or PC software. With the wireless link to your mobile device, these data will promptly be received there as well.

The easyTRX2S-IS-WiFi transmits according the AIS-Class B standard all own AIS data like ship name, speed and course over ground, etc. to every AIS receiver or transceiver within its radio range. Using the easyTRXS2-IS-WiFi is the easiest way to make yourself visible to others, having all necessary information about your surrounding too.

Running the “easyAIS” App, you will see a radar screen appearing, showing all received AIS targets within range. A click on a target will prompt you detailed information to this specific target, such as ship’s name, speed and course over ground, etc. Additional information to your own boat’s navigational status like your own speed, course, wind, etc. are available through sub-menus of the App, if you feed the easyTRX2S-IS-WiFi built-in multiplexer with boat information.

fully compatible with popular AIS navigational Apps for iPad®, iPhone® or iPod®, e.g.
– iNavX (charged) A new license for mobile device is mandatory.
– AIS Radar (charged)
– iPilot (charged)
fully compatible to charged Android-App iRegatta
fully compatible to Windows XP, Vista or Windows 7 (system running 32 bit)

Weatherdock App easyAIS im AppleStoreWeatherdock App in GooglePlay
What is needed to run the easyTRX2S-IS-WiFi?
The ClassB device needs to have its own GPS and VHF antennas. As an alternative you can run the easyTRX2S with the VHF antenna switch easySPLIT-OCB for using your existing VHF antenna. A separate GPS antenna is still needed. Another alternative is the VHF/GPS combi antenna.

easyTRX2S and gadgets that fit together

Your PC has to work at least on WIN XP SP2 and screen resolution  1024*768 for configuration. Plotter or PC software have to be intermateable to AIS to display incoming AIS data on screen. A MMS number is required to broadcast data – you will get it from German “Bundesnetzagentur” or the competent authority on your country. Your distributor will program your easyTRX2S for that MMSI number.

New WiFi function

40 clients at the same time by Multi-User-Connection AIS and Internet at the same time

AIS data by WiFi from easyTRX2S to an router with internet connection AIS data & internet available on all device´s connected to the router(e.g. WiFi from harbour, own 3G/4G hotspot aboard)

 

  • Integrated VHF splitter with pre-amplifier
  • Integrated WiFi module
  • Additional USB port for more connectivity
  • 38400 or 4800 Baud rate selection possible by software
  • 8 operating LEDs for more convenience
  • SD Card recorder for blackbox employment
  • Enlarged voltage input
  • Integrated multiplexer
  • Separate cable harness for “silent mode” or “PAN PAN” persistent signal
  • Plotter independent CPA alert
  • Plotter independent AIS S.A.R.T. alert

 

 

  • AIS receiver and transmitter with integrated GPS receiver
  • 1 transmitter, 2 receiver
  • Responsivity: -107dBm minimum, typically -112dBm
  • Data rate: 38400 or 4800 Baud, bi-directional
  • NMEA telegram type: VDM
  • WiFi module
    • provides wireless TCP/IP, NMEA 0183 (34800 baud)
    • WiFi range of 30 m without any special antennas (depending on local conditions)
    • fully compatible with popular navigational software or Apps for iPhone or iPad
  • Adapter VFH antenna: 50 Ohm, SO2239
  • Adapter GPS antenna: 50 Ohm, BNC
  • Cabin mounting, IP60, -25°C – 55°C
  • Dimensions: 198mm (L) 158mm (W) 47mm (H)
  • Weight: approx. 275 grams
  • Integrated WiFi module
  • Integrated VHF splitter
  • Plotter independent AIS S.A.R.T. alert
  • Plotter independent CPA alert
  • USB port
  • SD Card recorder

A156 easyTRX2S-IS-N2K-WiFi

EAN

4260276741564

The ClassB unit easyTRX2S receives AIS ClassA and ClassB signals and transmits its own data according to ClassB standard.

Function

All the easyTRX2S series have a great variety of applications: You can connect it to a PC or laptop through a USB port. Using a software, you can choose the speed transmission between 38400 or 4800 Baud data rate. Function activity is shown by 8 LED’s.  The easyTRX2S is able to interpret incoming AIS data for CPA alert or AIS S.A.R.T. emergency messages. Additionally, the easyTRX2S devices can be used as power source for external alerting devices. All received and transmitted AIS data can be stored in and internal SD Card recorder. With the build-in multiplexer input, 3 devices with different baud rate can be plugged to the easyTRX2S units. The external cable gives the possibility to choose between “silent mode” or “PAN PAN emergency call”.

The integrated VHF antenna splitter enables to use an existing VHF for AIS and HF radio at the same time. Before the incoming signals are separated, the built-in pre-amplifier increases the signal strength to avoid physical loss.

The integrated NMEA2000 Adapter enables to connect this AIS transceiver into the latest NMEA2000 network standard aboard.

NMEA2000 is a new data form which enables to plug different devices in a row on the data stream. Each units takes his special data out of the stream. This is also called “BUS-system”.

Up to now devices communicated in data form NMEA0183. It was mandatory that all devices had to be connected directly with each other. With the new standard, the only thing to do is just to plug the unit into the NMEA2000 data stream.

All easyTRX2S devices with the appendix “N2K” do have an internal converter that is converting NMEA0183 into NMEA2000 and forwarding the new data form into the NMEA2000 network.

The easyTRX2S-WiFi receives the incoming AIS data sent by commercial vessels (Class A) and pleasure boats (Class B). These telegrams are processed into a NMEA protocol which can be interpreted by chart plotters or PC software. With the wireless link to your mobile device, these data will promptly be received there as well.

The easyTRX2S-WiFi transmits according the AIS-Class B standard all own AIS data like ship name, speed and course over ground, etc. to every AIS receiver or transceiver within its radio range. Using the easyTRXS2-WiFi is the simplest way to make yourself visible to others, having all necessary information about your surrounding too.

Running the “easyAIS” App, you will see a radar screen appearing, showing all received AIS targets within range. A click on a target will provide you detailed information about this specific target, such as ship’s name, speed and course over ground, etc. Additional information about your own boat’s navigational status like your own speed, course, wind, etc. are available through sub-menus of the App, if you feed the easyTRX2S-WiFi built-in multiplexer with boat information.

fully compatible with popular AIS navigational Apps for iPad®, iPhone® or iPod®, e.g.
– iNavX (charged) A new license for mobile device is mandatory.
– AIS Radar (charged)
– iPilot (charged)
fully compatible to charged Android-App iRegatta
fully compatible to Windows XP, Vista or Windows 7 (system running 32 bit)

Weatherdock App easyAIS im AppleStoreWeatherdock App in GooglePlay
What is needed to run the easyTRX2S?

The Class B device needs a separate GPS antenna and an own VHF antenna. As an alternative you can run the easyTRX2S with the VHF antenna switch easySPLIT-OCB to use your existing VHF antenna. A separate GPS antenna is still needed. Another alternative is the VHF/GPS combi antenna.

easyTRX2S and gadgets that fit together

Your PC has to work at least on WIN XP SP2 and screen resolution  1024*768 for configuration. Plotter or PC software have to be compatible with AIS to display incoming AIS data on the screen. A MMSI number is required to broadcast data – you will get it from German “Bundesnetzagentur” or the competent authority on your country. Your distributor will program this number on your easyTRX2S.

New WiFi function

 

40 clients at the same time by Multi-User-Connection AIS and Internet at the same time

AIS data by WiFi from easyTRX2S to an router with internet connection AIS data & internet available on all device´s connected to the router(e.g. WiFi from harbour, own 3G/4G hotspot aboard)

 

  • Integrated VHF splitter with pre-amplifier
  • Integrated WiFi module
  • Integrated NMEA2000 converter
  • Additional USB port for more connectivity
  • 38400 or 4800 Baud rate selection possible by software
  • 8 operating LEDs for more convenience
  • SD Card recorder for blackbox employment
  • Enlarged voltage input
  • Integrated multiplexer
  • Separate cable harness for “silent mode” or “PAN PAN” persistent signal
  • Plotter independent CPA alert
  • Plotter independent AIS S.A.R.T. alert

  • AIS receiver and transmitter with integrated GPS receiver
  • 1 transmitter, 2 receiver
  • Responsivity: -107dBm minimum, typically -112dBm
  • Data rate: 38400 or 4800 Baud, bi-directional
  • NMEA telegram type: VDM
  • Adapter VFH antenna: 50 Ohm, SO2239
  • Adapter GPS antenna: 50 Ohm, BNC
  • Cabin mounting, IP60, -25°C – 55°C
  • Dimensions: 198mm (L) 158mm (W) 47mm (H)
  • Weight: approx. 275 grams
  • integrated WiFi module
    • provides wireless TCP/IP, NMEA 0183 (34800 baud)
    • NMEA input with multiplexer function for other boat intrument data
    • WiFi range of 30 m without any special antennas (depending on local conditions)
    • fully compatible with popular navigational software or Apps for iPhone or iPad

  • Integrated NMEA2000 adapter
  • Integrated WiFi module
  • Integrated VHF antenna splitter
  • Plotter independent AIS S.A.R.T. alert
  • Plotter independent CPA alert
  • USB port
  • SD Card recorder

A150 easyTRX2S-IS-IGPS

EAN

4260276741502

The ClassB unit easyTRX2S receives AIS ClassA and ClassB signals and transmits its own data according to ClassB standard.

Function

All the easyTRX2S series have a great variety of applications: You can connect it to a PC or laptop through a USB port. Using a software, you can choose the speed transmission between 38400 or 4800 Baud data rate. Function activity is shown by 8 LED’s.  The easyTRX2S is able to interpret incoming AIS data for CPA alert or AIS S.A.R.T. emergency messages. Additionally, the easyTRX2S devices can be used as power source for external alerting devices. All received and transmitted AIS data can be stored in and internal SD Card recorder. With the build-in multiplexer input, 3 devices with different baud rate can be plugged to the easyTRX2S units. The external cable gives the possibility to choose between “silent mode” or “PAN PAN emergency call”.

The integrated VHF antenna splitter enables to use an existing VHF for AIS and HF radio at the same time. Before the incoming signals are separated, the built-in pre-amplifier increases the signal strength to avoid physical loss.

The integrated GPS antenna is the new part of this AIS transceiver unit. This reduces the need of an external GPS antenna mounted on deck if the easyTRX2-iGPS is going to be used on Polyester boats.

For stainless steel vessels this unit is not useful. Here you have to connect a separate GPS antenna to the unit.

The easyTRX2S units with the appendix “IGPS” contain an integrated GPS antenna with 50 channel receiver. These units are designed to be used on polyester boats because there is no GPS interference. The ClassB can be mounted under deck but above sea level.

By means of this integrated GPS antenna a separate mounted external GPS antenna is no longer needed.

With Stainless steel boats as well as Kevlar and aluminum boats these units cannot be used. In such cases an external separate GPS antenna for the ClassB unit is mandatory.

What is needed to run the easyTRX2S?

The Class B device needs a separate GPS antenna and an own VHF antenna. As an alternative you can run the easyTRX2S with the VHF antenna switch easySPLIT-OCB to use your existing VHF antenna. A separate GPS antenna is still needed. Another alternative is the VHF/GPS combi antenna.

easyTRX2S and gadgets that fit together

Your PC has to work at least on WIN XP SP2 and screen resolution  1024*768 for configuration. Plotter or PC software have to be compatible with AIS to display incoming AIS data on the screen. A MMSI number is required to broadcast data – you will get it from German “Bundesnetzagentur” or the competent authority on your country. Your distributor will program this number on your easyTRX2S.

  • Integrated VHF splitter with pre-amplifier
  • Integrated GPS antenna for polyester boats
  • Additional USB port for more connectivity
  • 38400 or 4800 Baud rate selection possible by software
  • 8 operating LEDs for more convenience
  • SD Card recorder for blackbox employment
  • Enlarged voltage input
  • Integrated multiplexer
  • Separate cable harness for “silent mode” or “PAN PAN” persistent signal
  • Plotter independent CPA alert
  • Plotter independent AIS S.A.R.T. alert

  • AIS receiver and transmitter with integrated GPS receiver
  • 1 transmitter, 2 receiver
  • Responsivity: -107dBm minimum, typically -112dBm
  • Data rate: 38400 or 4800 Baud, bi-directional
  • NMEA telegram type: VDM
  • Adapter VFH antenna: 50 Ohm, SO2239
  • Adapter GPS antenna: 50 Ohm, BNC
  • Cabin mounting, IP60, -25°C – 55°C
  • Dimensions: 198mm (L) 158mm (W) 47mm (H)
  • Weight: approx. 275 grams

  • Integrated GPS antenna with 50-channel receiver
  • USB port
  • 38400 or 4800 baud selectable via software
  • Plotter independent CPA alert
  • SD Card recorder
  • Integrierter Multiplexer

A170 easyTRX2S-IS-IDVBT-N2K

EAN

4260276741700

 

The ClassB unit easyTRX2S receives AIS ClassA and ClassB signals and transmits its own data according to ClassB standard.

Function

All the easyTRX2S series have a great variety of applications: You can connect it to a PC or laptop through a USB port. Using a software, you can choose the speed transmission between 38400 or 4800 Baud data rate. Function activity is shown by 8 LED’s.  The easyTRX2S is able to interpret incoming AIS data for CPA alert or AIS S.A.R.T. emergency messages. Additionally, the easyTRX2S devices can be used as power source for external alerting devices. All received and transmitted AIS data can be stored in and internal SD Card recorder. With the build-in multiplexer input, 3 devices with different baud rate can be plugged to the easyTRX2S units. The external cable gives the possibility to choose between “silent mode” or “PAN PAN emergency call”.

The integrated VHF antenna splitter enables to use an existing VHF for AIS and HF radio at the same time. Before the incoming signals are separated, the built-in pre-amplifier increases the signal strength to avoid physical loss.

DVB-T enables to watch TV nearly wherever you want. Create your own sports bar aboard. By means of an internal antenna switched on the easyTRX2S unit with the appendix “DVB-T”, the VHF marine band is divided for the different applications. TV signals within the marine band are separated, pre-amplified and forwarded to your digital TV receiver. This receiver will decode the signal and pass it to your TV set.

The integrated NMEA2000 Adapter enables to connect this AIS transceiver into the latest NMEA2000 network standard aboard.

NMEA2000 is a new data form which enables to plug different devices in a row on the data stream. Each units takes his special data out of the stream. This is also called “BUS-system”.

Up to now devices communicated in data form NMEA0183. It was mandatory that all devices had been connected directly with each other. With the new standard just plugging the unit into the NMEA2000 data stream is the only thing you have to do.

All easyTRX2S devices with the appendix “N2K” do have an internal converter who is doing NMEA0183 into NMEA2000 and forwarding the new data form into the NMEA2000 network.

What is needed to run the easyTRX2S?

The ClassB device needs a separate GPS antenna and its own VHF antenna. As an alternative you can run the easyTRX2S with the VHF antenna switch easySPLIT-OCB. A separate GPS antenna is still needed. Another alternative is the VHF/GPS combi antenna.

easyTRX2S and gadgets that work together

Your PC has to work at least on WIN XP SP2 and screen resolution 1024*768. Plotter or PC software have to be AIS compatible in order to display incoming AIS data on the screen. A MMSI number is required to broadcast data.  You will get it from German Bundesamts fur Seeschifffahrt und Hydrographie or the competent authority on your country. Your distributor will set up this MMSI on your device.

 

 

  • Integrated VHF splitter with pre-amplifier
  • Integrated NMEA2000 adapter
  • Integrated DVBT antenna switch
  • Additional USB port for more connectivity
  • 38400 or 4800 Baud rate selection possible by software
  • 8 operating LEDs for more convenience
  • SD Card recorder for blackbox employment
  • Enlarged voltage input
  • Integrated multiplexer
  • Separate cable harness for “silent mode” or “PAN PAN” persistent signal
  • Plotter independent CPA alert
  • Plotter independent AIS S.A.R.T. alert

 

 

  • AIS receiver and transmitter with integrated GPS receiver
  • 1 transmitter, 2 receiver
  • Responsivity: -107dBm minimum, typically -112dBm
  • Data rate: 38400 or 4800 Baud, bi-directional
  • NMEA telegram type: VDM
  • Adapter VFH antenna: 50 Ohm, SO2239
  • Adapter GPS antenna: 50 Ohm, BNC
  • Cabin mounting, IP60, -25°C – 55°C
  • Dimensions: 198mm (L) 158mm (W) 47mm (H)
  • Weight: approx. 275 grams

  • Integrated NMEA2000 adapter
  • Integrated DVBT antenna switch
  • Plotter independent AIS S.A.R.T. alert
  • Plotter independent CPA alert
  • USB port
  • SD Card recorder

A157 easyTRX2S-IS-IGPS-N2K-DVBT

EAN

4260276741571

The ClassB unit easyTRX2S receives AIS ClassA and ClassB signals and transmits own data according to ClassB standard.

Function

All devices of the easyTRX2S series are performing with a lot of useful features:
By means of USB port connection to PC or Laptop is possible. With contained software it can be chosen between 38400 or 4800 Baud data rate. Function activity is shown by 8 LED’s. The easyTRX2S is able to interpret incoming AIS data for CPA alert or AIS S.A.R.T. emergency messages. Additional the easyTRX2S devices can be used as power source for external alerting devices. All received and transmitted AIS data can be stored with internal SD Card recorder. With the build-in multiplexer input 3 devices with different baud rate can be plugged to the easyTRX2S units. At least the external cable harness gives the possibility for outsourcing functionally like “change into silent mode ” or “PAN PAN emergency call” by switch.

The integrated VHF antenna splitter enables to use an existing VHF for AIS and HF radio at the same time. Before the incoming signals are separated, the built-in pre-amplifier increases the signal strength to avoid physical loss.

The integrated GPS antenna is the new part of this AIS transceiver unit. This reduces the need of an external GPS antenna mounted on deck if the easyTRX2-iGPS-N2K-WiFi is going to be used in Polyester boats.
For stainless steel vessels this unit is not useful. Here you have to connect a separate GPS antenna to the unit.

The easyTRX2S units with the appendix “IGPS” contain a integrated GPS antenna with 50 channel receiver. These units are designed for the use on polyester boats because there is no GPS interference. The ClassB can be mounted under deck but above sea level.

By means of this integrated GPS antenna a separate mounted external GPS antenna is no longer needed.

With Stailness steel boats as well as kevlar and aluminum boats these units can not be used. In such cases an external separate GPS antenna for the ClassB unit is mandatory.

DVBT enables to watch TV nearly wherever you want. Create you own sports bar aboard. By means of an internal antenna switch in every easyTRX2S unit with the appendix “DVBT” the VHF marinaband is divided for the different applications. TV signals within the marinaband were separated, pre-amplified and forwarded to your digital TV receiver. This receiver will decode the signal and pass them to your TV set.

The integrated NMEA2000 Adapter enables to connect this AIS transceiver into the latest NMEA2000 network standard aboard.

NMEA2000 is a new data form which enables to plug different devices in a row on the data stream. Each units takes his special data out of the stream. This is also called “BUS-system”.

Up to now devices communicated in data form NMEA0183. It was mandatory that all devices had been connected directly with each other. With the new standard just plugging the unit into the NMEA2000 data stream is the only thing you have to do.

All easyTRX2S devices with the appendix “N2K” do have an internal converter who is doing NMEA0183 into NMEA2000 and forwarding the new dataform into the NMEA2000 network.

What is needed to run the easyTRX2S?

The ClassB device needs a separate GPS antenna and an own VHF antenna. As an alternative you can run the easyTRX2S with the VHF antenna switch easySPLIT-OCB for using your existing VHF antenna. A separate GPS antenna is still needed. An other alternative is the VHF/GPS combi antenna.

easyTRX2S and gadgets that fit together

Your PC has to work at least on WIN XP SP2 and screen resolution 1024*768 for configuration. Plotter or PC software have to be intermateable to AIS to display incoming AIS data on screen. A MMS number is required to broadcast data – you will get it from German “Bundesnetzagentur”. Your distributor will program your easyTRX2S for that MMSI number.

  • Integrated VHF splitter with pre-amplifier
  • Integrated GPS antenna
  • Integrated NMEA2000 adapter
  • Integrated DVBT antenna switch
  • Additional USP port for more connectivity
  • 38400 or 4800 Baud rate selection possible by software
  • 8 operating LEDs for more convenience
  • SD Card recorder for blackbox employment
  • Enlarged voltage input
  • Integrated multiplexer
  • Separate cable harness for “silent mode” or “PAN PAN” persistent signal
  • Plotter independent CPA alert
  • Plotter independent AIS S.A.R.T. alert

  • AIS receiver and transmitter with integrated GPS receiver
  • 1 transmitter, 2 receiver
  • Responsivity: -107dBm minimum, typically -112dBm
  • Data rate: 38400 or 4800 Baud, bi-directional
  • NMEA telegram type: VDM
  • Adapter VFH antenna: 50 Ohm, SO2239
  • Adapter GPS antenna: 50 Ohm, BNC
  • Cabin mounting, IP60, -25°C – 55°C
  • Dimensions: 198mm (L) 158mm (W) 47mm (H)
  • Weight: approx. 275 grams

  • Integrated GPS antenna
  • Integrated NMEA2000 adapter
  • Integrated DVBT antenna switch
  • Plotter independent AIS S.A.R.T. alert
  • Plotter independent CPA alert
  • USB port
  • SD Card recorder

A158 easyTRX2S-IS-IGPS-IDVBT-N2K-WiFi

EAN

4260276741588

The Class B unit easyTRX2S receives AIS Class A and Class B signals and transmits own data according to Class B standard.

Function

All devices of the easyTRX2S series are performing with a lot of useful features:
By means of USB port connection to PC or Laptop is possible. With contained software it can be chosen between 38400 or 4800 Baud data rate. Function activity is shown by 8 LED’s. The easyTRX2S is able to interpret incoming AIS data for CPA alert or AIS S.A.R.T. emergency messages. Additional the easyTRX2S devices can be used as power source for external alerting devices. All received and transmitted AIS data can be stored with internal SD Card recorder. With the build-in multiplexer input 3 devices with different baud rate can be plugged to the easyTRX2S units. At least the external cable harness gives the possibility for outsourcing functionally like “change into silent mode ” or “PAN PAN emergency call” by switch.

The integrated VHF antenna splitter enables to use an existing VHF for AIS and HF radio at the same time. Before the incoming signals are separated, the built-in pre-amplifier increases the signal strength to avoid physical loss.

The integrated GPS antenna is the new part of this AIS transceiver unit. This reduces the need of an external GPS antenna mounted on deck if the easyTRX2-iGPS-N2K-WiFi is going to be used in Polyester boats.
For stainless steel vessels this unit is not useful. Here you have to connect a separate GPS antenna to the unit.

The easyTRX2S units with the appendix “IGPS” contain a integrated GPS antenna with 50 channel receiver. These units are designed for the use on polyester boats because there is no GPS interference. The Class B can be mounted under deck but above sea level.

By means of this integrated GPS antenna a separate mounted external GPS antenna is no longer needed.

With Stainless steel boats as well as Kevlar and aluminum boats these units can not be used. In such cases an external separate GPS antenna for the Class B unit is mandatory.

The easyTRX2S-WiFi receives the incoming AIS data sent by commercial vessels (Class A) and pleasure boats (Class B). These telegrams are processed into a NMEA protocol which can be interpreted by chart plotters or PC software. With the wireless link to your mobile device, these data will promptly be received there as well.

The easyTRX2S-WiFi transmits according the AIS-Class B standard all own AIS data like ship name, speed and course over ground, etc. to every AIS receiver or transceiver within its radio range. Using the easyTRXS2-WiFi is the simplest way to make yourself visible to others, having all necessary information about your surrounding too.

Running the “easyAIS” App, you will see a radar screen appearing, showing all received AIS targets within range. A click on a target will prompt you detailed information to this specific target, such as ship’s name, speed and course over ground, etc. Additional information to your own boat’s navigational status like your own speed, course, wind, etc. are available through sub-menus of the App, if you feed the easyTRX2S-WiFi built-in multiplexer with boat information.

fully compatible with popular AIS navigational Apps for iPad®, iPhone® or iPod®, e.g.
– iNavX (charged) A new license for mobile device is mandatory.
– AIS Radar (charged)
– iPilot (charged)
fully compatible to charged Android-App iRegatta
fully compatible to Windows XP, Vista or Windows 7 (system running 32 bit)

Weatherdock App easyAIS im AppleStoreWeatherdock App in GooglePlay
DVBT enables to watch TV nearly wherever you want. Create you own sports bar aboard. By means of an internal antenna switch in every easyTRX2S unit with the appendix “DVBT” the VHF marina band is divided for the different applications. TV signals within the marina band were separated, pre-amplified and forwarded to your digital TV receiver. This receiver will decode the signal and pass them to your TV set.

The integrated NMEA2000 Adapter enables to connect this AIS transceiver into the latest NMEA2000 network standard aboard.

NMEA2000 is a new data form which enables to plug different devices in a row on the data stream. Each units takes his special data out of the stream. This is also called “BUS-system”.

Up to now devices communicated in data form NMEA0183. It was mandatory that all devices had been connected directly with each other. With the new standard just plugging the unit into the NMEA2000 data stream is the only thing you have to do.

All easyTRX2S devices with the appendix “N2K” do have an internal converter who is doing NMEA0183 into NMEA2000 and forwarding the new data form into the NMEA2000 network.

What is needed to run the easyTRX2S?

The ClassB device needs a separate GPS antenna and an own VHF antenna. As an alternative you can run the easyTRX2S with the VHF antenna switch easySPLIT-OCB for using your existing VHF antenna. A separate GPS antenna is still needed. An other alternative is the VHF/GPS combi antenna.easyTRX2S and gadgets that fit together
Your PC has to work at least on WIN XP SP2 and screen resolution 1024*768 for configuration. Plotter or PC software have to be intermateable to AIS to display incoming AIS data on screen. A MMS number is required to broadcast data – you will get it from German “Bundesnetzagentur”. Your distributor will program your easyTRX2S for that MMSI number.

New WiFi function

40 clients at the same time by Multi-User-Connection AIS and Internet at the same time

  • AIS data by WiFi from easyTRX2S to an router with internet connection
  • AIS data & internet available on all device´s connected to the router(e.g. WiFi from harbor, own 3G/4G hotspot aboard)
  • Integrated VHF splitter with pre-amplifier
  • Integrated WiFi module
  • Integrated GPS antenna
  • Integrated NMEA2000 adapter
  • Integrated DVBT antenna switch
  • Additional USP port for more connectivity
  • 38400 or 4800 Baud rate selection possible by software
  • 8 operating LEDs for more convenience
  • SD Card recorder for blackbox employment
  • Enlarged voltage input
  • Integrated multiplexer
  • Separate cable harness for “silent mode” or “PAN PAN” persistent signal
  • Plotter independent CPA alert
  • Plotter independent AIS S.A.R.T. alert
  • AIS receiver and transmitter with integrated GPS receiver
  • 1 transmitter, 2 receiver
  • Responsivity: -107dBm minimum, typically -112dBm
  • Data rate: 38400 or 4800 Baud, bi-directional
  • NMEA telegram type: VDM
  • Adapter VFH antenna: 50 Ohm, SO2239
  • Adapter GPS antenna: 50 Ohm, BNC
  • Cabin mounting, IP60, -25°C – 55°C
  • Dimensions: 198mm (L) 158mm (W) 47mm (H)
  • Weight: approx. 275 grams
  • integrated WiFi module
    • provides wireless TCP/IP, NMEA 0183 (34800 baud)
    • NMEA input with multiplexer function for other boat instrument data
    • WiFi range of 30 m without any special antennas (depending on local conditions)
    • fully compatible with popular navigational software or Apps for iPhone or iPad
  • Integrated GPS antenna
  • Integrated NMEA2000 adapter
  • Integrated DVBT antenna switch
  • Integrated WiFI module
  • Plotter independent AIS S.A.R.T. alert
  • Plotter independent CPA alert
  • USB port
  • SD Card recorder

A152 easyTRX2S-IS-IDVBT

EAN

4260276741526

The ClassB unit easyTRX2S receives AIS ClassA and ClassB signals and transmits own data according to ClassB standard.

Function

All devices of the easyTRX2S series are performing with a lot of useful features:
By means of USB port connection to PC or Laptop is possible. With contained software it can be chosen between 38400 or 4800 Baud data rate. Function activity is shown by 8 LED’s.  The easyTRX2S is able to interpret incoming AIS data for CPA alert or AIS S.A.R.T. emergency messages. Additional the easyTRX2S devices can be used as power source for external alerting devices. All received and transmitted AIS data can be stored with internal SD Card recorder. With the build-in multiplexer input 3 devices with different baud rate can be plugged to the easyTRX2S units. At least the external cable harness gives the possibility for outsourcing functionally like “change into silent mode ” or “PAN PAN emergency call” by switch.

The integrated VHF antenna splitter enables to use an existing VHF for AIS and HF radio at the same time. Before the incoming signals are separated, the built-in pre-amplifier increases the signal strength to avoid physical loss.

DVBT enables to watch TV nearly wherever you want. Create you own sports bar aboard. By means of an internal antenna switch in every easyTRX2S unit with the appendix “DVBT”  the VHF marinaband is divided for the different applications. TV signals within the marinaband were seperated, pre-amplified and forwarded to your digital TV receiver. This receiver will decode the signal and pass them to your TV set.

What is needed to run the easyTRX2S?
The ClassB device needs a separate GPS antenna and an own VHF antenna. As an alternative you can run the easyTRX2S with the VHF antenna switch easySPLIT-OCB for using your existing VHF antenna. A separate GPS antenna is still needed. An other alternative is the VHF/GPS combi antenna.

easyTRX2S and gadgets that fit together
Your PC has to work at least on WIN XP SP2 and screen resolution  1024*768 for configuration. Plotter or PC software have to be intermateable to AIS to display incoming AIS data on screen. A MMS number is required to broadcast data – you will get it from German “Bundesnetzagentur”. Your distributor will program your easyTRX2S for that MMSI number.

  • Integrated VHF splitter with pre-amplifier
  • Integrated DVBT antenna switch
  • Additional USP port for more connectivity
  • 38400 or 4800 Baud rate selection possible by software
  • 8 operating LEDs for more convenience
  • SD Card recorder for blackbox employment
  • Enlarged voltage input
  • Integrated multiplexer
  • Separate cable harness for “silent mode” or “PAN PAN” persistent signal
  • Plotter independent CPA alert
  • Plotter indeoendent AIS S.A.R.T. alert

  • AIS receiver and transmitter with integrated GPS receiver
  • 1 transmitter, 2 receiver
  • Responsivity: -107dBm minimum, typically -112dBm
  • Data rate: 38400 or 4800 Baud, bi-directional
  • NMEA telegram type: VDM
  • Adapter VFH antenna: 50 Ohm, SO2239
  • Adapter GPS antenna: 50 Ohm, BNC
  • Cabin mounting, IP60, -25°C – 55°C
  • Dimensions: 198mm (L) 158mm (W) 47mm (H)
  • Weight: approx. 275 grams

  • DVBT receiver inside
  • Integrated VHF splitter
  • Plotter independent AIS S.A.R.T. alert
  • Plotter independent CPA alert
  • USB port
  • SD Card recorder

A155 easyTRX2S-IS-IGPS-N2K

EAN

4260276741557

The ClassB unit easyTRX2S receives AIS ClassA and ClassB signals and transmits own data according to ClassB standard.

Function

All devices of the easyTRX2S series are performing with a lot of useful features:
By means of USB port connection to PC or Laptop is possible. With contained software it can be chosen between 38400 or 4800 Baud data rate. Function activity is shown by 8 LED’s.  The easyTRX2S is able to interpret incoming AIS data for CPA alert or AIS S.A.R.T. emergency messages. Additional the easyTRX2S devices can be used as power source for external alerting devices. All received and transmitted AIS data can be stored with internal SD Card recorder. With the build-in multiplexer input 3 devices with different baud rate can be plugged to the easyTRX2S units. At least the external cable harness gives the possibility for outsourcing functionally like “change into silent mode ” or “PAN PAN emergency call” by switch.

The integrated VHF antenna splitter enables to use an existing VHF for AIS and HF radio at the same time. Before the incoming signals are separated, the built-in pre-amplifier increases the signal strength to avoid physical loss.

The integrated GPS antenna is the new part of this AIS transceiver unit. This reduces the need of an external GPS antenna mounted on deck if the easyTRX2-iGPS-N2K-WiFi is going to be used in Polyester boats.
For stainless steel vessels this unit is not useful. Here you have to connect a separate GPS antenna to the unit.

The easyTRX2S units with the appendix “IGPS” contain a integrated GPS antenna with 50 chanel receiver. These units are designed for the use on polyester boats because there is no GPS interference. The ClassB can be mounted under deck but above sea level.

By means of this integrated GPS antenna a separate mounted external GPS antenna is no longer needed.

With Stainless steel boats as well as Kevlar and aluminum boats these units can not be used. In such cases an external separate GPS antenna for the ClassB unit is mandatory.

The integrated NMEA2000 Adapter enables to connect this AIS transceiver into the latest NMEA2000 network standard aboard.

NMEA2000 is a new data form which enables to plug different devices in a row on the data stream. Each units takes his special data out of the stream. This is also called “BUS-system”.

Up to now devices communicated in data form NMEA0183. It was mandatory that all devices had been connected directly with each other. With the new standard just plugging the unit into the NMEA2000 data stream is the only thing you have to do.

All easyTRX2S devices with the appendix “N2K” do have an internal converter who is doing NMEA0183 into NMEA2000 and forwarding the new data form into the NMEA2000 network.

What is needed to run the easyTRX2S?
The ClassB device needs a separate GPS antenna and an own VHF antenna. As an alternative you can run the easyTRX2S with the VHF antenna switch easySPLIT-OCB for using your existing VHF antenna. A separate GPS antenna is still needed. An other alternative is the VHF/GPS combi antenna.

easyTRX2S and gadgets that fit together
Your PC has to work at least on WIN XP SP2 and screen resolution  1024*768 for configuration. Plotter or PC software have to be intermateable to AIS to display incoming AIS data on screen. A MMS number is required to broadcast data – you will get it from German “Bundesnetzagentur”. Your distributor will program your easyTRX2S for that MMSI number.

  • Integrated VHF splitter with pre-amplifier
  • Integrated GPS antenna
  • Integrated NMEA2000 converter
  • Additional USP port for more connectivity
  • 38400 or 4800 Baud rate selection possible by software
  • 8 operating LEDs for more convenience
  • SD Card recorder for blackbox employment
  • Enlarged voltage input
  • Integrated multiplexer
  • Separate cable harness for “silent mode” or “PAN PAN” persistent signal
  • Plotter independent CPA alert
  • Plotter independent AIS S.A.R.T. alert

  • AIS receiver and transmitter with integrated GPS receiver
  • 1 transmitter, 2 receiver
  • Responsivity: -107dBm minimum, typically -112dBm
  • Data rate: 38400 or 4800 Baud, bi-directional
  • NMEA telegram type: VDM
  • Adapter VFH antenna: 50 Ohm, SO2239
  • Adapter GPS antenna: 50 Ohm, BNC
  • Cabin mounting, IP60, -25°C – 55°C
  • Dimensions: 198mm (L) 158mm (W) 47mm (H)
  • Weight: approx. 275 grams

  • Integrated GPS antenna
  • Integrated NMEA2000 converter
  • Plotter independent AIS S.A.R.T. alert
  • Plotter inependent CPA alert
  • USB port
  • SD Card recorder

A151 easyTRX2S-IS-IGPS-WiFi

EAN

4260276741519

The ClassB unit easyTRX2S receives AIS ClassA and ClassB signals and transmits own data according to ClassB standard.

Function

All devices of the easyTRX2S series are performing with a lot of useful features:
By means of USB port connection to PC or Laptop is possible. With contained software it can be chosen between 38400 or 4800 Baud data rate. Function activity is shown by 8 LED’s.  The easyTRX2S is able to interpret incoming AIS data for CPA alert or AIS S.A.R.T. emergency messages. Additional the easyTRX2S devices can be used as power source for external alerting devices. All received and transmitted AIS data can be stored with internal SD Card recorder. With the build-in multiplexer input 3 devices with different baud rate can be pluged to the easyTRX2S units. At least the external cable harness gives the possibility for outsourcing functionaly like “change into silent mode ” or “PAN PAN emergency call” by switch.

The integrated VHF antenna splitter enables to use an existing VHF for AIS and HF radio at the same time. Before the incoming signals are separated, the built-in pre-amplifier increases the signal strength to avoid physical loss.
The integrated GPS antenna is the new part of this AIS transceiver unit. This reduces the need of an external GPS antenna mounted on deck if the easyTRX2-iGPS-N2K-WiFi is going to be used in Polyester boats.
For stainless steel vessels this unit is not useful. Here you have to connect a separate GPS antenna to the unit.The easyTRX2S units with the appendix “IGPS” contain a integrated GPS antenna with 50 channel receiver. These units are designed for the use on polyester boats because there is no GPS interference. The ClassB can be mounted under deck but above sea level.

By means of this integrated GPS antenna a separate mounted external GPS antenna is no longer needed.

With Stainless steel boats as well as Kevlar and aluminum boats these units can not be used. In such cases an external separate GPS antenna for the ClassB unit is mandatory.

The easyTRX2S-WiFi receives the incoming AIS data sent by commercial vessels (Class A) and pleasure boats (Class B). These telegrams are processed into a NMEA protocol which can be interpreted by chart plotters or PC software. With the wireless link to your mobile device, these data will promptly be received there as well.

The easyTRX2S-WiFi transmits according the AIS-Class B standard all own AIS data like ship name, speed and course over ground, etc. to every AIS receiver or transceiver within its radio range. Using the easyTRXS2-WiFi is the simpliest way to make yourself visible to others, having all necessary information about your surrounding too.

Running the “easyAIS” App, you will see a radar screen appearing, showing all received AIS targets within range. A click on a target will prompt you detailed information to this specific target, such as ship’s name, speed and course over ground, etc. Additional information to your own boat’s navigational status like your own speed, course, wind, etc. are available through sub-menues of the App, if you feed the easyTRX2S-WiFi built-in multiplexer with boat information.

fully compatible with popular AIS navigational Apps for iPad®, iPhone® or iPod®, e.g.
– iNavX (charged) A new license for mobile device is mandatory.
– AIS Radar (charged)
– iPilot (charged)
fully compatible to charged Android-App iRegatta
fully compatible to Windows XP, Vista or Windows 7 (system running 32 bit)

Weatherdock App easyAIS im AppleStoreWeatherdock App in GooglePlayWhat is needed to run the easyTRX2S?
The ClassB device needs a separate GPS antenna and an own VHF antenna. As an alternative you can run the easyTRX2S with the VHF antenna switch easySPLIT-OCB for using your existing VHF antenna. A separate GPS antenne is still needed. An other alternative is the VHF/GPS combi antenna.

easyTRX2S and gadgets that fit together
Your PC has to work at least on WIN XP SP2 and screen resolution  1024*768 for configuration. Plotter or PC software have to be intermateable to AIS to display incoming AIS data on screen. A MMS number is required to broadcast data – you will get it from German “Bundesnetzagentur”. Your distributor will program your easyTRX2S for that MMSI number.

New WiFi function

40 clients at the same time by Multi-User-Connection AIS and Internet at the same time

  • AIS data by WiFi from easyTRX2S to an router with internet connection AIS data & internet available on all device´s connected to the router(e.g. WiFi from harbour, own 3G/4G hotspot aboard)

  • Integrated VHF splitter with pre-amplifier
  • Integrated GPS antenna for polyestherboats
  • Integrated WiFi module
  • Additional USP port for more connectivity
  • 38400 or 4800 Baud rate selection possible by software
  • 8 operating LEDs for more convenience
  • SD Card recorder for blackbox employment
  • Enlarged voltage input
  • Integrated multiplexer
  • Separate cable harness for “silent mode” or “PAN PAN” persistent signal
  • Plotter independent CPA alert
  • Plotter independent AIS S.A.R.T. alert

  • AIS receiver and transmitter with integrated GPS receiver
  • 1 transmitter, 2 receiver
  • Responsivity: -107dBm minimum, typically -112dBm
  • Data rate: 38400 or 4800 Baud, bi-directional
  • NMEA telegram type: VDM
  • Adapter VFH antenna: 50 Ohm, SO2239
  • Adapter GPS antenna: 50 Ohm, BNC
  • Cabin mounting, IP60, -25°C – 55°C
  • Dimensions: 198mm (L) 158mm (W) 47mm (H)
  • Weight: approx. 275 grams
  • integrated WiFi module
    • provides wireless TCP/IP, NMEA 0183 (34800 baud)
    • NMEA input with multiplexer function for other boat intrument data
    • WiFi range of 30 m without any special antennas (depending on local conditions)
    • fully compatible with popular navigational software or Apps for iPhone or iPad

  • Integrated GPS antenna
  • Integrated WiFi module
  • Plotter independent AIS S.A.R.T. alert
  • Plotter independent CPA alert
  • USB port
  • SD Card recorder

A154 easyTRX2S-IS-IGPS-IDVBT

EAN

4260276741540

The ClassB unit easyTRX2S receives AIS ClassA and ClassB signals and transmits its own data according to ClassB standard.

 
Function

All the easyTRX2S series have a great variety of applications: You can connect it to a PC or laptop through a USB port. Using a software, you can choose the speed transmission between 38400 or 4800 Baud data rate. Function activity is shown by 8 LED’s.  The easyTRX2S is able to interpret incoming AIS data for CPA alert or AIS S.A.R.T. emergency messages. Additionally, the easyTRX2S devices can be used as power source for external alerting devices. All received and transmitted AIS data can be stored in and internal SD Card recorder. With the build-in multiplexer input, 3 devices with different baud rate can be plugged to the easyTRX2S units. The external cable gives the possibility to choose between “silent mode” or “PAN PAN emergency call”.

The integrated VHF antenna splitter enables to use an existing VHF for AIS and HF radio at the same time. Before the incoming signals are separated, the built-in pre-amplifier increases the signal strength to avoid physical loss.

The integrated GPS antenna is the new part of this AIS transceiver unit. This reduces the need of an external GPS antenna mounted on deck if the easyTRX2-iGPS-N2K-WiFi is going to be used on Polyester boats.

For stainless steel vessels this unit is not useful. Here you have to connect a separate GPS antenna to the unit.

The easyTRX2S units with the appendix “IGPS” contain an integrated GPS antenna with 50 channel receiver. These units are designed to be used on polyester boats because there is no GPS interference. The ClassB can be mounted under deck but above sea level.

By means of this integrated GPS antenna a separate mounted external GPS antenna is no longer needed.

With Stainless steel boats as well as Kevlar and aluminum boats these units cannot be used. In such cases an external separate GPS antenna for the ClassB unit is mandatory.

DVB-T enables to watch TV nearly wherever you want. Create your own sports bar aboard. By means of an internal antenna switched on the easyTRX2S unit with the appendix “DVB-T”, the VHF marine band is divided for the different applications. TV signals within the marine band are separated, pre-amplified and forwarded to your digital TV receiver. This receiver will decode the signal and pass it to your TV set.

What is needed to run the easyTRX2S?

The Class B device needs a separate GPS antenna and an own VHF antenna. As an alternative you can run the easyTRX2S with the VHF antenna switch easySPLIT-OCB to use your existing VHF antenna. A separate GPS antenna is still needed. Another alternative is the VHF/GPS combi antenna.

easyTRX2S and gadgets that work together

Your PC has to work at least on WIN XP SP2 and screen resolution  1024*768 for configuration. Plotter or PC software have to be compatible with AIS to display incoming AIS data on the screen. A MMSI number is required to broadcast data – you will get it from German “Bundesnetzagentur” or the competent authority on your country. Your distributor will program this number on your easyTRX2S.

 

  • Integrated VHF splitter with pre-amplifier
  • Integrated GPS antenna for Polyestherboats
  • Integrated DVBT antenna switch for TV reception
  • Additional USB port for more connectivity
  • 38400 or 4800 Baud rate selection possible by software
  • 8 operating LEDs for more convenience
  • SD Card recorder for blackbox employment
  • Enlarged voltage input
  • Integrated multiplexer
  • Separate cable harness for “silent mode” or “PAN PAN” persistent signal
  • Plotter independent CPA alert
  • Plotter independent AIS S.A.R.T. alert

 

  • AIS receiver and transmitter with integrated GPS receiver
  • 1 transmitter, 2 receiver
  • Responsivity: -107dBm minimum, typically -112dBm
  • Data rate: 38400 or 4800 Baud, bi-directional
  • NMEA telegram type: VDM
  • Adapter VFH antenna: 50 Ohm, SO2239
  • Adapter GPS antenna: 50 Ohm, BNC
  • Cabin mounting, IP60, -25°C – 55°C
  • Dimensions: 198mm (L) 158mm (W) 47mm (H)
  • Weight: approx. 275 grams

  • Integrated GPS antenna
  • Integrated DVBT antenna switch
  • Plotter independent AIS S.A.R.T. alert
  • Plotter inependent CPA alert
  • USB port
  • SD Card recorder

Select Language
Back to top