A040-DP easyRESCUE-DIVEpro

Download: Software
Leaflet easyRESCUE-DIVE-Pro

EAN

4260276745401

Each diver has certainly wondered what happens if he gets separated from his “Buddy” or dive group and in addition has no orientation where the dive boat is.

The tiny portable transmitter unit easyRESCUE-DIVEpro can be worn on the vest during the dive. Don’t panic, it is water-resistant to more than 100 meters!

The unit is developed out of the AIS S.A.R.T. emergency beacon easyRESCUE-DIVE for safari boats as well as diving bases. The unit of each member of the diving group will be activated before diving and handed out with specific briefing “how to use”. A persistant position report will be send by every unit received by the diving boat or diving center. By means of position report the diving group could be tracked on water surface to be “insight”.

If the group appears out of sight of the diving boat, the diving master takes out his transmitter, unfolds the antenna and lift up the unit as high as possible. The diving boat will get the current position to drive by and pick up the whole group.

If the case described above occurs, on water surface the diver takes out his easyRESCUE-DIVEpro, unfolds the antenna, pushes the slider down and press the ALERT button. Via VHF radio the dive boat receives detailed information regarding the exact GPS position of the diver along with his/her Course Over Ground (COG) and Speed Over Ground (SOG) if he/she is in a current. This information is updated every minute. Just fix the unit at the carried along “ALERT BUOY” or reach you arm out of the water as high as possible.

Scenario as followed is running in the background:

The easyRESCUE-DIVEpro with its built-in GPS receiver will get a fix within the next 35 seconds after activation. With this fix the current GPS position is transmitted with a formal emergency telegram on two world wide standardize VHF frequencies.

Additional to the GPS position, which is updated every minute, data as “course over ground” and “speed over ground” are transmitted as well as an individual unit ID.

These data within this emergency telegram will be received by every AIS equipped vessel in the surrounding of the victim. Radiation range depends on the height of the receiving antenna. Range up to 10 nautical miles or more are possible.

Since 2007 for every commercial vessel of more than 300 BRT and/or 12 people crew/passenger having AIS system aboard is mandatory by law. Each year the number of pleasure boats using AIS system as well is still increasing. The pleasure boaters at least want to have all information regarding the commercial vessels.

All these vessels do receive the emergency telegram as a position report on the chart plotter or PC screen and can assist with fast and effective help.

 

  • Locator unit based on approved VHF technologies
  • Ready for 100m diving depth
  • No registration needed
  • No license needed
  • 2 step communication
    • Position report to diving boat
    • regular AIS S.A.R.T. emergency message
  • proprietary frequencies for diving groups in special areas
  • Integrated GPS receiver
  • BSH / 4615 / 4361565 / 10 (for base until easyRESCUE A040)
  • Frequency range
    * 161,975 MHz & 162,025 MHz for AIS Alert
    * customized frequency for position report
  • Transmission mode
    Position report
    Msg. 01
    * AIS position report
    * Unit-ID
    * Speed over Ground (SOG)
    * Curse over Ground (COG)    ALERT ModeMsg. 01
    * AIS Positions report
    * Unit-ID
    * Speed over Ground (SOG)
    * Curse over Ground (COG)
    Msg. 14 – Safety message
    * Unit-ID
    * Text “SART active” in distress
    Text “SART TEST” in Test mode
  • Radiation power: 0,5 Watt
  • Waterproof: 100% down to 100 meter diving depth
  • Operation temperature: –20°C – 65°C
  • Dimensions: Length: 125mm | Width: 68mm | Height: 30mm
  • Weight: 380 Gram
  • Battery lifetime: rechargeable batteries | 1000 charging periods possible
  • No registration
  • No VHF radio license
  • No additional costs
  • Position report to diving boat
  • AIS S.A.R.T. emergency message to all AIS receivers within
    transmission range

A122 Tamperproof & Powersocket

EAN

4260276741229

The A122 Tamperproof & Powersocket is a tamper-proof charging station for the vmsTRACK-PRO. The charging station can be easily connected to the electrical system or another external power source. The cable ends only need to be connected accordingly. Mains voltages of 9 to 32 volts are possible.

  • Input: 9 – 32 V DC
  • Operating Temperature: 0°C – 50°C
  • Stowage: -20°C – 70°C
A122 Tamperproof Powersocket Product Picture

A121 Power Supply Socket

EAN

4260276741212

The A121 Power Supply Socket can be easily connected to the electrical system or another external power source. The cable ends only need to be connected accordingly. Mains voltages of 9 to 24 volts are possible. If you want to work with the national power grid, we recommend the A180. Here is a Euro plug for the 230 volt application already preassembled. All you need is an adapter plug for your country or socket type.

A040-D easyRESCUE-DIVE

Leaflet easyRESCUE-DIVE

EAN

4260276740062

Z

Approval

Our easyRESCUE Rescue Transmitters have a basic approval and do not have to be registered anymore!

Each diver has certainly wondered what happens if he gets separated from his “Buddy” or dive group and in addition has no orientation where the dive boat is.

The easyRESCUE-DIVE is the solution to this problem.The small portable transmitter can be worn on the vest during the dive. Don’t panic, it is water-resistant to more than 100 meters!

If the case described above occurs, the easyRESCUE-DIVE is activated by the diver on water surface by the touch of a button. Via VHF radio the dive boat receives detailed information regarding the exact GPS position of the diver along with his/her Course Over Ground (COG) and Speed Over Ground (SOG) if he/she is in a current. This information is updated every minute. Just fix the unit at the carried along “ALERT BUOY” or reach you arm out of the water as high as possible.

  • Description: easyRESCUE-DIVE A040-D
  • Certification BSH: BSH / 4615 / 4361565 / 10 (for base unit easyRESCUE A040
  • Radiation Power: 2 Watt
  • Waterproof: 100% down to 100 meter diving depth
  • Operation temperature: -20°C – 65°C
  • Dimensions: Length: 125mm | Width: 68mm | Height: 30mm
  • Weight: 380 Gram
  • Battery lifetime: 10 Years (unit has to be disposed properly)
  • Radiated power: 2 Watt
  • Operation temperature: -20°C – 55°C
  • Dimensions: Length 128 mm
  • Width: 76mm Height: 32mm
  • Weight: 380 Gram
  • Battery lifetime: 10 years
  • Battery capacity in „Alert mode“: 45 hours
  • No registration
  • No VHF radio license
  • No additional costs

A135 easyINFOBOX mobile

 Deutsch |

A135 easyINFOBOX mobile

E

easyINFOBOX mobile

p

Product information

Independent AIS System for mobile applications

The easyINFOBOX by Weatherdock AG is a shock-proof PP/ABS box with an integrated AIS receiver. It‘s the robust, dust- and water-resistant housing for a AIS unit, receiving AIS signals from the ambient vessels which can be displayed by a mobile device. The easyINFOBOX is designed for the mobile usage of AIS data. By means of the DC plug power supply of every board net can be used. The box has exterior plugs for GPS and VHF antennas. The internal AIS unit has got a WiFi module, transmitting the data to a connected mobile device like an iPad, Tablet or Laptop. With an AIS capable software or app the received AIS data with the relevant information can be shown on the screen.

Function The AIS unit inside the easyINFOBOX  receives AIS data within a range of up to 25 miles via the connected VHF antenna. The received data are translated into  NMEA0183 protocols and transmitted to the used mobile devices like iPad, Tablet PC or Laptop. These units are getting the NMEA0183 protocols by means of WiFi TCP/IP connection in a peer-to-peer network. Required is an AIS capable software or app running on the mobile device, as well as the correspondent maps. By connecting the external GPS antenna, the AIS unit receives it‘s own GPS position.

Applications

  • Helicopter Rescue-Units of
  • oil platforms or offshore wind parks
  • Diving groups
  • Long-Term regattas with air support
  • Charter units
Z

Highlights

  • Water-resitant, shock-proof
  • easy to carry by means of two handles
  • internal AIS receiver with WiFi module
  • exterior plugs for power supply, GPS antenna and VHF antenna
  • exterior WiFi antenna

Technical Data

  • Dimensions:
  • (L) 29 cm x (W) 23 cm x (H) 9,5 cm
  • Weight: 1,5 Kg
  • Operating temperature range:
  • -20°C to 55°C
  • AIS receiver with 161,975 MHz and 162,025 MHz
  • WiFi
  • peer-to-peer-connection
  • maximum range in free air: 100m
  • usual range: approx. 30m
  • with our new WiFi function it is possible to have up to 40 clients (terminals).

Product pictures

A053 easyINFOBOX

 Deutsch |

A053 easyINFOBOX

E

easyINFOBOX

p

Product information

The easyINFOBOX-Diving developed by Weatherdock is a shock-proof PP/ABS box with an integrated AIS receiver for diving groups. Is‘s the robust, dust- and water-resistant housing for a AIS unit, receiving the signals from the activated easyDIVEPOS units of the group members which can be displayed by a integrated Chart Plotter. The easyINFOBOX is designed for the mobile usage of AIS data. By means of the DC plug power supply of every board net can be used. The box has exterior plugs for GPS and VHF antennas.

Function The AIS unit inside the easyINFOBOX Divi9ng receives via the connected VHF antenna transmitted signals within a distance of up to 12 nautical miles. The range depends on the receiving height of the VHF antenna. The received data are translated into a NMEA0183 protocols and is transmitted to the Chart Plotter. By connecting the external GPS antenna, the AIS unit receives it‘s own GPS position

Applications

  • Helicopter Rescue-Units of oil platforms or offshore wind parks
  • Diving groups
  • Long-Term regattas with air support
  • Charter units

 

Z

Highlights

  • water-resitant, shock-proof
  • easy to open and close with two big cover flaps
  • internal AIS receiver with WIFi module
  • exterior plugs for power supply, GPS antenna and VHF antenna
P

What is needed?

Which requests for INFOBOX?

The easyINFOBOX has to be connected to the DC power supply. The external VHF antenna has to be connected as well. The used mobile device needs AIS capable software or app to deal with the NMEA0183 data and show them on the display.

Technical Data

  • (L) 29 cm x (W) 23 cm x (H) 9,5 cm
  • Weight: 1,5 Kg
  • Operating temparature range: -20°C to 55°C
  • AIS receiver with 161,975 MhZ and 162,025 Mhz

Product pictures

DOWNLOADS

 

Leaflet

Select Language
Back to top