Why does my device show “Firmware verification failed”?

Dieser Fehler kann bei den Geräten easyTRX2/S sowie den easyTRX3 Geräten auftreten.
Das ist aber kein Grund zur Panik, das können Sie selbst lösen.

Der Fehler selbst kann auftreten wenn:

  1. die Betriebsspannung während des Winterlagers ganz langsam sinkt und ab einem gewissen Bereich kommt, der dann zu Schreibfehlern führt (nur ältere easyTRX2 Geräte)
  2. Die Verbindung während eines laufenden Updatevorgangs unterbrochen wurde (z.B. durch schlechte USB-Kabel, Wackelkontakt,…, alle Geräte)
  3. Sie den Update-Vorgang starten wollten, während noch keine Firmware auswählt war (easyTRX3, ältere Version vom Programming-Tool < 1.8)

Fehler-Merkmal:

  • Im Normal-Fall booten die Geräte beim Anschluss von 12V regulär hoch, hier blinken alle LEDs abwechseln. Ist dies aber nicht der Fall und die Warning/Error LED ist sofort aktiv, könnte eine fehlende Firmware die Ursache sein.
  • Außerdem ist es Ihnen im Fehlerfall nicht möglich, sich via USB/WiFi mit dem Gerät zu verbinden.

Lösung:

Je nachdem welches Gerät Sie haben, gibt es verschiedene Lösungen:

  1. easyTRX2:
  • Laden Sie die Firmware von hier herunter.
    • Die ZIP-Datei entpacken Sie bitte um die darin enthaltene *.wdc Datei zu bekommen. Diese benötigen wir später, bitte den Pfad zur Datei merken.
  • Verbinden Sie 12 oder 24V DC mit dem Gerät sowie das USB A auf A-Kabel mit dem Windows PC (MAC nicht verfügbar!).
  • Öffnen Sie nun das Programming-Tool, wählen Sie den COM-Port aus, betätigen Sie aber NICHT “Connect”!
  • Oben Links wählen Sie sodann File > Update aus
  • Nun die voherige *.wdc Datei auswählen und “2 Start Update” betätigen.
  • Der Vorgang sollte nun laufen, das Gerät am Ende wieder normal starten und laufen.

2. easyTRX3

  • Laden Sie die Firmware von hier herunter.
    • Die ZIP-Datei entpacken Sie bitte um die darin enthaltene *.hex Datei zu bekommen. Diese benötigen wir später, bitte den Pfad zur Datei merken.
  • Trennen Sie 12 oder 24V vom Gerät, für das Update wird kein Bordnetz benötigt, trennen Sie außerdem das USB-Kabel.
  • Die Geräte-LEDs sollten alle ausgeschaltet sein.
  • Öffnen Sie das Programming-Tool, unten Links den Button “Info/Update” dann “FW Update“.
  • Wählen Sie nun die *.hex Datei aus die Sie zuvor heruntergeladen haben.
  • Verbinden Sie nun das USB-A auf Micro B-Kabel mit PC und easyTRX3, der Updatevorgang sollte automatisch starten.
  • Nach dem Update-Vorgang können Sie auch wieder die 12/24V anschließen, das Gerät funktioniert nun wieder normal
Weitere Downloads finden Sie hier, z.B das Programming-Tool.

Why does WiFi regulary disconnects from my easyTRX3?

Please check if the easyTRX3 WiFi network “easyTRX3_xxxxx” is visible with your PC/Laptop/mobilephone.
Also check if not regular reboot of the easyTRX3 happens.
You can see it when all LEDs light up regulary.
If you see regular reboot, please check your power wires.

Note that the easyTRX3-Manager app does not keep alive in background.
It is just used for programming and diagnose of the easyTRX3.
If you close app, press Home-button or lock your phone, the app disconnects from easyTRX3.

But that does not mean that you don´t get AIS-/GPS data.
The app is not required for this.

If you use an AIS app please get sure that it is able to get AIS data by TCP/IP.
Use IP 192.168.16.254 and Port 8080 within that app.

What is MTM, Text messages?

—Under devolopement—
Following topic is still under developement and will work in the future on your easyTRX3 unit.

Please note that only SOTMA units are able to send Binary Broadcast messages and it is not sure that the boat owners read that message although
the SOTMA unit automatically acknowledged the reception!

The easyTRX3 is a AIS Class B SOTDMA unit.
This SOTDMA allows Class B unit as same as Class A to send text messages over AIS.

We call that MTM, Maritime Text Messenger.
Therefore we have a special App which connects to your easyTRX3 mit WiFi (WiFi within TRX3 is required).
If you don´t have a easyTRX3 with WiFi you could use USB for PC/MAC.
WiFi-App for Android: https://play.google.com/store/apps/details?id=com.weatherdock.easyTRX3Msg
WiFi-App for iOs: not available

Adressed Message:
AIS message 6 & 26 are used for that adressed Message and will be send to a specific MMSI number.
If you want to send a message to an MMSI number its necessary that this boat is also equipped with a SOTDMA unit.
Then the reception will automatically be acknowledged by it.
Note that this still does not mean that the boat owner was read that message!
One message could contain up to 48 symbols.
Within a minute you could send in total 72 symbols.
Example:
“Arrival in Marina Portofino, ETA 1800”

Broadcast message:
For that AIS message 8/26 is used to send an all ships message to all AIS units within range.
Here you could use up to 54 symbols.
Within one minute you are allowed to send 72 symbols.
Example:
“Marina Portofino is closed”

How long could your record with the easyTRX3?

The easyTRX3 has a non removeable integrated SD card.

All received AIS targets and the own position is saved.

By USB you can read-out the SD card.

To do that, please first connect the unit with the programming tool and activate that mode.

Please note that within that time, there is no recording of AIS targets and own position.

For more details please have a look into the manual or follow the instructions within the programming tool.

Storage:

We are using a 4 or 8 GB micro SD card.

With an AIS traffic of e.g. 20% you can safe up to 2 or 4 months.

Rule of thumb: 2GB per month on an AIS traffic with 20%

Exact calculation:

On an AIS traffic with 20%: 20% x 75 slots/sec = 15 Messages per sec.

Each message has 50 characters -> 15 x 50 = 750 characters.

In additon the RMC (own position) is saved which has 66 characters -> 750 + 66 = 816 characters per second

One month has 2.592.000 seconds -> 2.592.000 x 816 characters = 2.115.072.000 -> 2GB

 

Select Language

Accessibility Menu

WordPress Cookie Plugin by Real Cookie Banner