Does the AIS Transceiver send, even if the PC is switched off?
Yes, the easyTRX works completely independent. As long as the easyTRX is switched on, it receives and sends data.
Yes, the easyTRX works completely independent. As long as the easyTRX is switched on, it receives and sends data.
You need a PC only one time at the beginning to enter your MMSI and the rest of the ship data like name, length, etc. etc. After this is programmed you do not need any more your PC.
FAQ: easyRESCUE >>>
All plotters or pc’s which are equipped with an AIS-receiver will get the message from the easyRESCUE.
FAQ: easyAIS-IS >>>
Yes, the easyAIS-IS has an integrated USB-Chip. So you can connect your PC with easyAIS-IS by using the USB-Cable enclosed in package. You also can use the RS232 Interface by using SUB D 9 Female. Only connect the white cable with Pin 2, the green one on Pin 5. You can watch the NMEA-Data on window by using Hyperterminal.