With some MAC OS versions starting the easyTRX3 programming tool can cause the following error message:
“App cannot be opened because it is from an unidentified developer”
This Error comes from a Mac internal “gatekeeper”, which is supposed to prevent malware from getting onto the PC via unknown apps.
Since this tool is the first we developed for Mac, we are not yet certified here.
We assure you that our software is not infected with malware!
If you experience this error, please follow the instructions below:
Following topic is still under developement and will work in the future on your easyTRX3 unit.
Please note that only SOTMA units are able to send Binary Broadcast messages and it is not sure that the boat owners read that message although
the SOTMA unit automatically acknowledged the reception!
The easyTRX3 is a AIS Class B SOTDMA unit.
This SOTDMA allows Class B unit as same as Class A to send text messages over AIS.
We call that MTM, Maritime Text Messenger.
Therefore we have a special App which connects to your easyTRX3 mit WiFi (WiFi within TRX3 is required).
If you don´t have a easyTRX3 with WiFi you could use USB for PC/MAC.
WiFi-App for Android: https://play.google.com/store/apps/details?id=com.weatherdock.easyTRX3Msg
WiFi-App for iOs: not available
AIS message 6 & 26 are used for that adressed Message and will be send to a specific MMSI number.
If you want to send a message to an MMSI number its necessary that this boat is also equipped with a SOTDMA unit.
Then the reception will automatically be acknowledged by it.
Note that this still does not mean that the boat owner was read that message!
One message could contain up to 48 symbols.
Within a minute you could send in total 72 symbols.
“Arrival in Marina Portofino, ETA 1800”
For that AIS message 8/26 is used to send an all ships message to all AIS units within range.
Here you could use up to 54 symbols.
Within one minute you are allowed to send 72 symbols.
“Marina Portofino is closed”
You´ll find it here:
Also you could search it under:
Information>Download>Software & Drivers>easyTRX3
The easyTRX3 has a non removeable integrated SD card.
All received AIS targets and the own position is saved.
By USB you can read-out the SD card.
To do that, please first connect the unit with the programming tool and activate that mode.
Please note that within that time, there is no recording of AIS targets and own position.
For more details please have a look into the manual or follow the instructions within the programming tool.
We are using a 4 or 8 GB micro SD card.
With an AIS traffic of e.g. 20% you can safe up to 2 or 4 months.
Rule of thumb: 2GB per month on an AIS traffic with 20%
On an AIS traffic with 20%: 20% x 75 slots/sec = 15 Messages per sec.
Each message has 50 characters -> 15 x 50 = 750 characters.
In additon the RMC (own position) is saved which has 66 characters -> 750 + 66 = 816 characters per second
One month has 2.592.000 seconds -> 2.592.000 x 816 characters = 2.115.072.000 -> 2GB