A027 easySPLIT OCB

Running out mid/end 2017!
Service for this equipment continues!

Functionality:

The easySPLIT OCB (OCB stand for “operates Class B) is checking whether there is a transmission power from the VHF radio or from the Class B AIS receiver to the Antenna. When this is the case the easySPLIT disconnects the other connected units very quickly (the AIS receiver and the car radio). If all the units are in reception mode, the units are all connected to the same antenna.

A quick disconnection is necessary because the Class B AIS Transceiver transmit their signal with a power of 2 W in a very short period of time. Therefore, the used splitter, the easySPLIT OCB, must disconnect the other units even faster than the Class B AIS transceiver is giving out its message. The easySPLIT OCB is disconnecting the other units in less than
1 ms!

What else do I need to use the easySPLIT OCB?
You do not need anything apart from your already existing units (e.g. VHF antenna) and of course a power supply.

What is suitable for the easySPLIT OCB?
All existing VHF radios, all existing AIS Class B transceiver and all existing FM radios can be connected to the easySPLIT. Nevertheless, the optimum of performance can be achieved if you use other units of the Weatherdock AG because these units are perfectly-matched.

  • Frequency selective power divider with 2 transmit/receive ports (VHF radio and Class B AIS) and 1 receiver port
  • VHF radio (IN/OUT): 50Ohm, SO239
  • AIS transceiver: 50Ohm, BNC
  • FM radio: 50 Ohm, BNC
  • VHF antenna: 50Ohm, SO 239
  • Power: 9v-28VDC, @<120mA (average of different operation modes)
  • Operation conditions: under deck, 0°C to 60°C
  • 140 mm (l) x 140 mm (w) x 35 mm (h)
  • Weight: approx. 400 g
  • Active VHF Splitter to connect to the existing VHF antenna:
  • VHF radio
  • AIS transceiver Class B (recommended
  • for use with easyTRX) or AIS receiver
  • FM car radio
  • Enlarged DC power input
  • Item number A027

A024 easyDVB-T

Running out mid/end 2017!
Service for this equipment continues!

Functionality:
Separates the frequency bands according to the different applications and amplifies those bands which are not received as well as the nominal frequency band. As a consequence you can receive DVBT Signals (DVBT is identical to? DTT; ATSC;TDT; ISDB ) for your digital television receiver.

What is necessary to use the easyDVBT
Nothing special is necessary. To watch television you need to connect the easyDVBT to the digital terrestrial receiver and the power supply.

What is suitable for the easyDVBT?:
All existing DVBT (DTT, ATSC,TDT, ISDB ) receivers, VHF radios and FM car radios can be connected to the easyDVBT. You can also connect the easySPLIT to integrate your AIS receiver, e. g. “easyAIS”.

  • Frequency selective divider with 1 transmit/receive port (VHF radio), 1 DVBT receiver port and 1 FM car radio port
  • VHF antenna: 50Ohm, BNC
  • VHF radio (IN/OUT): 50Ohm, BNC
  • DVBT receiver: 75Ohm, BNC
  • FM radio: 50 Ohm, BNC
  • Power: 9v-28VDC, @<120mA
  • Operation conditions: under deck, 0°C to 60°C
  • 140 mm (l) x 140 mm (w) x 35 mm (h)
  • Weight: approx. 325 g
  • Antenna splitter, enables the reception of DVBT frequencies by means of a customary VHF Antenna
  • Integrated Amplifier
  • Highest sensitivity over the entire frequency band
  • Enlarged power input from 9VDC-28VDC

A026 easySPLIT

Running out mid/end 2017!
Service for this equipment continues!

Functionality:
The easySPLIT is checking whether there is a transmission power from the VHF radio to the antenna. If this is the case the easySPLIT disconnects the other connected units very quickly (the AIS receiver and the car radio).
If all the units are in reception mode, the units are all connected to the same antenna.

What is necessary to use the easySPLIT
You do not need anything apart from your (already) existing VHF antenna and of course a power supply.

What is suitable for the easySPLIT?
All existing VHF radios, all existing AIS receivers and all existing FM radios can be connected to the easySPLIT. Nevertheless, the optimum performance can be achieved if you use other units of the Weatherdock AG because these units are perfectly-matched.

  • Frequency selective power divider with 1 transmit-receive port (VHF Radio) and 2 receiver ports
  • VHF antenna: 50Ohm, SO 239
  • VHF radio (IN/OUT): 50Ohm, SO239
  • AIS receiver: 50Ohm, BNC
  • FM radio: 50 Ohm, Chinch
  • Power: 9v-28VDC, @<120mA average of the different operation modes
  • Operation conditions: under deck, 0°C to 60°C
  • 140mm (l) x 140mm (w) x 35mm (h)
  • Weight: approx. 450 g
  • Active VHF Splitter to connect to the existing VHF antenna:
  • VHF radio
  • AIS receiver (recommended for use with the easyAIS)
  • FM car radio
  • Enlarged DC power input
  • Item number A026

Select Language
Back to top