Programming-Tool
(Windows 32-Bit und 64-Bit)
- Version 2.0.1_Beta
- Size: 19.043 KB
- Changelog:
- Compatibility to easyTRX3S 2. Gen. from Manufacturing date 04/2026.
- Automatic GUI changes depending on version of easyTRX3 (1st or 2nd Gen.)
- If you find any errors or failures, please send a description and screenshot (CTRL+Print) to support@weatherdock.de
- Note: Wi-Fi connectivity will be supported again in future versions! Currently, only a physical USB connection is supported in the tool.
- You can connect via Wi-Fi using our “easyTRX3-Manager” app; see further down this page or click here: Link
- For a MAC version please scroll down below on this page.
Programming-Tool
(Windows 32-Bit und 64-Bit)
- Version 1.9.1
- Size: 19.543 KB
- Bugfixes
- Please report issues with screenshots (CTRL+Print) to support@weatherdock.de
USB Driver
- Hersteller: Microchip
- Size: 6.433 KB
- Installation:
- extract ZIP-File
- Right-click on file with small “Gear” symbol
- Select installation
- Follow instructions and select yes/ok
- remove USB and power from easyTRX3
- restart your PC
- Connect power to easyTRX3, wait until fully booted
- Connect USB to easyTRX3 again
- Within Device-manager(right click on Windows-Symbole and then select Device-Manager) you should find another line with new COM-Port
- Select this COM-Port for connection with easyTRX3 and its Programming-Tool
SD-Analysetool
(Windows 32-Bit und 64-Bit)
- Version 1.5
- Größe: 3.55 MB
- Tool to analyze the content of SD card or internal storage of easyTRX3
- also compatible to use for easyTRX2/S SD Card content
HLK-RM04-Discover-Tool
(Windows 32-Bit und 64-Bit)
- For easyTRX2 / 3 / 3S 1. Gen.
- Size:157kB
- Tool to find IP of easyTRX3, if unit is connected to your own WiFi-Network.
- Use IP you found and Port 8080 then to get AIS/GPS data from your easyTRX3-WiFi
- Does not work with easyTRX3S 2. Generation (Manufacturing Date 04/2026 and following)
Programming-Tool
(MAC Os, 32/64-Bit)
- Version: 2.0.1_Beta
- Size: 16.535 KB
- Changes:
- Compatibility to easyTRX3S 2. Gen
- Automatic GUI changes for 1. / 2. Gen.
- Compatibility to latest ARM processors
- Note: Wi-Fi connectivity will be supported again in future versions! Currently, only a physical USB connection is supported in the tool.
- Please send issues/errors with screenshot (shift + command + 4) to support@weatherdock.de
Programming-Tool
(MAC Os, 32/64-Bit)
- Version 1.8 (Removed due to incompatibility with ARM processors)
- Größe: 19.695 KB
- Bugfixes
- Hard-Reset of WiFi if you change some settings and it did not work after
- We still recommend not to change any settings within Web-Interface of WiFi-Module.
APPs
For Android:
For Apple:
