You have an easy2-MOB and it is not receiving the DSC-Acknowlege from the DSC VHF radio?
The reason might be the automatic acknowlege of the DSC VHF radio.
The DSC VHF radio (e.g. Raymarine or B&G) is transmitting the Acknowledge directly after reception and within that time, the easy2-MOB is still busy.
Note:
Also change the AUTO ACK to MANUAL for DSC TEST Calls.
Actions:
Manually transmitt again the DSC call afterwards.
This has no influece within an emergency case. This closed and open Loop call will not be acknowledged automatically!
Your easy2-MOB is absolutely ok and ready for use.
← Faqs
