Remote Boat Monitoring with AIS
Keep an eye on your boat.
Even if you are
not on board.
With ME SENSE and AIS technology from Weatherdock, you can conveniently monitor your boat via app – in port, in winter storage or on the go.
AIS SOTDMA
Class B
ME SENSE IoT
integrated
Push alerts
in real time
easyTRX3S
| Why remote monitoring?
A boat is often left unattended –
that’s when every piece of information counts.
ME SENSE notifies you of critical changes directly via push notification. This allows you to react early, before a small problem becomes a major issue.
Temperature & humidity
Ideal for winter storage: Protect sensitive equipment from condensation, frost and mold.
Water in the bilge
Immediate alarm in case of water ingress – before a leak develops into a serious problem.
Position & movement
Anchor alarm and theft protection: Receive a warning if your boat moves unexpectedly.
Low battery
Detect critical voltage drops early and prevent deeply discharged batteries before the trip begins.
Shore power outage
Be notified immediately if the power supply in the port is interrupted – before the battery runs out.
Hatch or door opened
Receive a notification if something opens unexpectedly – protection against theft and weather damage.
This is how ME SENSE works
Four steps to receiving push notifications on your smartphone.
Sensors measure data on board
The ME SENSE sensors regularly record important values directly on the boat – battery, temperature, humidity, bilge, door, movement and more.
ME SENSE Relay collects the data
The sensors send these values to the ME SENSE Relay via Bluetooth – wirelessly, energy-saving, and reliably.
Upload to the cloud
The relay transmits the data to the Weatherdock Cloud via Wi-Fi. Without marina Wi-Fi: the ME SENSE Gate LTE enables worldwide connectivity.
The app shows everything in real time.
With the ME SENSE app, you can view your boat data anytime on your smartphone or tablet. Exceeding a limit results in an immediate push notification.
All the important information at a glance
11 monitoring functions –
one system.
Start with the ME SENSE basic set and expand modularly as needed. No complex wiring, easy installation via app.
Monitor battery
Keep an eye on the on-board voltage and detect critical values early – even remotely.
Check the bilge
Immediate alert via the app when water is detected in the bilge.
Secure the door & hatch
Notification in case of unexpected opening – security and theft protection.
Keep an eye on the temperature
Ideal for winter storage, long periods of inactivity and sensitive equipment.
Check shore power
Determine if the shore power supply has been interrupted.
Follow position
Use position data for theft protection
or anchor alarm.
Observe humidity
Ideal for winter storage: Protect sensitive equipment from condensation and mold.
Measure air pressure
Keep an eye on changes in air pressure and recognize weather changes early.
Detect movement
Alarm in case of unauthorized access on board – ideal as additional protection against burglary and theft.
Remote switching with ME SENSE Switch
Verbraucher wie Heizung, Lüfter, Ladegerät oder Bilgepumpe per App steuern – bequem vor dem Törn.
Akustischer Alarm mit ME SENSE Buzzer
Erhalten Sie an Bord sofort ein akustisches Signal, sobald ein Schwellenwert überschritten wird.
ME SENSE App
Your boat in your pocket.
All sensor data can be accessed at any time – clearly arranged, in real time, with immediate push alarms when limit values are exceeded.
Real-time dashboard
All sensor data at a glance – battery, temperature, bilge, door status and more.
Push notifications
Immediate alert on smartphone or tablet as soon as a limit is exceeded.
Easy setup
Scan sensors via app, mount them and use them immediately. No complex wiring required.
The app shows everything in real time.
Charter fleets and multiple boat owners can keep track of all their boats in one app.
Typical use cases
The right solution for every situation.
ME SENSE adapts to your everyday life – whether home port, winter storage or long-term travel.
In the port
You’re not on board, but your boat remains under control. Shore power, bilge, and safety are always in focus.
In winter storage
Monitor battery, temperature, humidity and unwanted movements – even over months.
Before the trip
Switch on electrical devices in advance and check the boat’s condition before departure.
In case of long absence
Receive warnings before moisture, water, or power outages cause real damage.
The product
easyTRX3S – AIS SOTDMA
with integrated ME SENSE Relay.
The easyTRX3S combines an AIS Class B SOTDMA transceiver and smart boat monitoring in one device. No second relay is needed – simply install and get started immediately.
| AIS Class | Class B SOTDMA |
| ME SENSE Relay | Integrated – no additional device required |
| GPS | Integrated |
| Splitter | Integrated |
| Connectivit | WLAN / LTE (via Gateway) |
| Approvals | EU, FCC, IC – Made in Germany |
SOTDMA
GPS integrated
Splitter integrated
Weatherdock’s AIS expertise
Monitoring meets AIS –
Security and surveillance in one system.
Weatherdock has stood for AIS, navigation, tracking, and safety on the water for years. With ME SENSE, this expertise is expanded to include intelligent boat monitoring.
AIS SOTDMA – the more reliable class
SOTDMA reserves transmission time slots in advance – higher reliability than CSTDMA, especially in busy waters.
Position visible to all
Your boat is visible on radar screens and AIS plotters of all surrounding ships – maximum safety at sea.
AIS + IoT: the perfect duo
The easyTRX3S comes with the ME SENSE Relay already integrated. A device for AIS safety and smart boat monitoring.
Who is it suitable for?
For anyone who cares about their boat.
Whether for recreational sailors or charter fleets – ME SENSE is suitable for every boat.
Owners of sailboats and motorboats
Yachts in their home port or abroad
Boats in winter storage
Long-term berths in marinas
Charter fleets and boat rental companies
Skipper
Frequently Asked Questions
Everything you need to know.
What is ME SENSE?
ME SENSE is an IoT-based boat monitoring system from Weatherdock. Sensors on board send measurements to the ME SENSE relay. The data is displayed in the app.
What does this have to do with AIS?
The ME SENSE Relay is already integrated into the easyTRX3S. This allows AIS safety (navigation, collision avoidance) and smart boat monitoring to be combined in one system.
Does this also work without Wi-Fi in the port?
Yes. With the ME SENSE Gate LTE, the system can also be used without Marina Wi-Fi – worldwide connectivity via LTE.
Will I receive a warning if there are problems?
Yes. If a defined limit is exceeded, you will receive a push notification on your smartphone – immediately, at any time.
Can I install the system myself?
Yes. The installation is designed for easy setup. Sensors are scanned and integrated via an app. No complex wiring is required.
How modular is the system?
Highly modular. Start with the basic set and add sensors or switches as needed. The system grows with your requirements.
Start remote monitoring
Keep an eye on your boat.
Always and everywhere.
With ME SENSE and the easyTRX3S from Weatherdock: simple, modular and reliable – Made in Germany.
+49 911 – 37 66 38 30 · info@weatherdock.de · www.easyais.com